0154.500DRTL Fuseholders and Accessories - 154 Series - SMF OMNI-BLOK® Fuse Block For Nano2® Very Fast-Acting Fuses

Part Number: 0154.500DRTL

Series: 154

Littelfuse Fuse 154 Series Data Sheet
Littelfuse_fuseblocks_154_155.pdf
(151,362 bytes)
Last Uploaded: January 17, 2012

154 Series - SMF OMNI-BLOK® Fuse Block For Nano2® Very Fast-Acting Fuses

The SMF Omni-Blok® Fuseholder permits quick and easy replacement of Nano^2® SMF surface mount fuses. The fuse block and pre-installed fuse combinationcan be placed on the PC board in one efficient manufacturing operation. Fuse replacement is accomplished without exposing the PC board to the detrimental effects of solder heat.

Help	Property	Value
It is established by Littelfuse as a value of current which the fuse, fuseholder, fuse clip or other fuse accessory can carry, based on a controlled set of test conditions. Close Info	Ampere Rating (A)	0.5
The maximum rms AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VAC (V)	125
The maximum RMS AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VDC (V)	125
Mounting method Close Info	Mounting Method	Surface Mount
Close Info	Fuse Type	454
Does the accessory have some type of method of indication. Close Info	Indicating	No
Terminal Material Close Info	Terminal Material	Cu