044901.5 Fuses - 449 Series - Lead-Free NANO<sup>2®</sup> SLO-BLO<sup>®</sup> Subminiature Surface Mount Fuse - Littelfuse

Part Number: 044901.5

Series: 449

Littelfuse 449 Series Fuse
Littelfuse_Fuse_449_Series.pdf
(169,902 bytes)
Last Uploaded: February 28, 2011

449 Series - Lead-Free NANO^2® SLO-BLO^® Subminiature Surface Mount Fuse

Features:

Lead-free
Slo-Blo®
Small size
Wide range of current ratings available
Wide operating temperature range
Low temperature de-rating

Applications:

PCs
LCD/PDP monitor
Portable DVD player
Power supply
Networking / PC servers
White goods
Office Automation equipment
Industrial equipment
Medical equipment

Electrical Characteristics

Help	Property	Value
It is established by Littelfuse as a value of current which the fuse, fuseholder, fuse clip or other fuse accessory can carry, based on a controlled set of test conditions. Close Info	Ampere Rating (A)	1.5
The maximum RMS AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VDC (V)	125
The maximum rms AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VAC (V)	125
Refers to how rapidly the fuse responds to various current overloads. Fuse characteristics can be classified into three general categories: very fast-acting, fast-acting or Slo-Blo® (time delay)fuse. The distinguishing feature of Slo-Blo fuses is that these fuses have additional thermal inertia (surge withstand) designed to tolerate normal initial or start-up overload pulse. Close Info	Opening	Slo-Blo®/Time Lag (T)/Time Delay
Package Size/Form Factor Close Info	Package Size	6.10 x 2.69mm
RMS Surge (Non-repetitive) On-state Fusing Current- Measure of let-through energy in terms of current and time for fusing purposes. Close Info	Nominal Melting I²T (A²sec)	26.53
Cold resistance is the resistance obtained using a measuring current of no more than 10% of the fuse's nominal rated current. The factory should be consulted if this parameter is critical to the design in question. Close Info	Nominal Cold Resistance (Ohms)	0.0261
Close Info	Interrupt Rating	50A@125VDC
Close Info	Interrupt Rating	50A@125VAC
The part of a fuse enclosing the fuse elements and supporting the contacts. Body is also referred to as cartridge, tube, or case. Close Info	Body	Ceramic
Color or Alpha-Numeric code used to define the amp rating of the device for ease-of-maintenance and quality checks. Close Info	Marking Code	LF 1.5A T

Request a Sample

Check Distributor Stock Click Here

Find A Distributor

Design Support

Plant Certifications

Philipines ISO 9001:2000
Littelfuse_Phils_ISO9001_102407.pdf (550 K)

Phils ISO 14001 2004
PhilsISO14001Certificate.pdf (22 K)

Environmental Data

Environmental Info

RoHS Date: 2005-07-14 00:00:00
ICP Test Reports
ICPTest 449.pdf
China RoHS Reports
ChinaRoHS 449.pdf