045401.5 Fuses - 454 Series - NANO<sup>2®</sup> Slo-Blo® Subminiature Surface Mount Fuse

Part Number: 045401.5

Series: 454

452-454 Series Datasheet
Littelfuse_Fuse_452_454_Series.pdf
(161,446 bytes)
Last Uploaded: May 05, 2011

454 Series - NANO^2® Slo-Blo® Subminiature Surface Mount Fuse

The NANO² Slo-Blo fuse has enhanced inrush withstand characteristics over the NANO2 Fast-Acting fuse. The unique time delay feature of this fuse design helps solve the problem of nuisance �opening� by accommodating inrush currents that normally cause a fast-acting fuse to open.

Help	Property	Value
It is established by Littelfuse as a value of current which the fuse, fuseholder, fuse clip or other fuse accessory can carry, based on a controlled set of test conditions. Close Info	Ampere Rating (A)	1.5
The maximum RMS AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VDC (V)	125
The maximum rms AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VAC (V)	125
Refers to how rapidly the fuse responds to various current overloads. Fuse characteristics can be classified into three general categories: very fast-acting, fast-acting or Slo-Blo® (time delay)fuse. The distinguishing feature of Slo-Blo fuses is that these fuses have additional thermal inertia (surge withstand) designed to tolerate normal initial or start-up overload pulse. Close Info	Opening	Slo-Blo®/Time Lag (T)/Time Delay
Package Size/Form Factor Close Info	Package Size	6.10 x 2.69mm
RMS Surge (Non-repetitive) On-state Fusing Current- Measure of let-through energy in terms of current and time for fusing purposes. Close Info	Nominal Melting I²T (A²sec)	3.65
Cold resistance is the resistance obtained using a measuring current of no more than 10% of the fuse's nominal rated current. The factory should be consulted if this parameter is critical to the design in question. Close Info	Nominal Cold Resistance (Ohms)	0.093
Close Info	Interrupt Rating	300A@32VDC
Close Info	Interrupt Rating	50A@125VDC
Close Info	Interrupt Rating	50A@125VAC
The part of a fuse enclosing the fuse elements and supporting the contacts. Body is also referred to as cartridge, tube, or case. Close Info	Body	Ceramic
Color or Alpha-Numeric code used to define the amp rating of the device for ease-of-maintenance and quality checks. Close Info	Marking Code	LF T 1.5A
Moisture Sensitivity Level Close Info	Moisture Sensitivity Level	1
Operating Temperature (deg C) Close Info	Operating Temperature (deg C)	-55�C - + 125�C