0435002. Fuses - 435 Series - SlimLine® Lead-Free 0402 Very Fast-Acting Thin-Film Fuse - Littelfuse

Part Number: 0435002.

Series: 435

435 Series Data Sheet
Littelfuse_Fuse_435.pdf
(646,882 bytes)
Last Uploaded: June 16, 2011

435 Series - SlimLine® Lead-Free 0402 Very Fast-Acting Thin-Film Fuse

Complies with electronic industry environmental standards for lead reduction.
The SlimLine 0402 fuse is the world's smallest available fuse.
Ideal for space sensitive applications including disc drives and handheld devices including mobile phones, cameras and personal communication devices.
The low profile flat surface and full-faced termination are designed for superior performance in surface mount assembly processes.

Electrical Characteristics

Help	Property	Value
It is established by Littelfuse as a value of current which the fuse, fuseholder, fuse clip or other fuse accessory can carry, based on a controlled set of test conditions. Close Info	Ampere Rating (A)	2
The maximum rms AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VAC (V)	32
The maximum RMS AC voltage and/or the maximum DC voltage at which the fuse is designed to operate. For example, fuses rated at 600 volts and below may be applied at any voltage less than their rating. There is no rule for applying AC fuses in DC circuits such as applying the fuse at half its AC voltage rating. Fuses used on DC circuits must have DC ratings. Close Info	VDC (V)	32
Refers to how rapidly the fuse responds to various current overloads. Fuse characteristics can be classified into three general categories: very fast-acting, fast-acting or Slo-Blo® (time delay)fuse. The distinguishing feature of Slo-Blo fuses is that these fuses have additional thermal inertia (surge withstand) designed to tolerate normal initial or start-up overload pulse. Close Info	Opening	Very Fast-Acting (FF)
Package Size/Form Factor Close Info	Package Size	0402 (1005)
RMS Surge (Non-repetitive) On-state Fusing Current- Measure of let-through energy in terms of current and time for fusing purposes. Close Info	Nominal Melting I²T (A²sec)	0.1
Cold resistance is the resistance obtained using a measuring current of no more than 10% of the fuse's nominal rated current. The factory should be consulted if this parameter is critical to the design in question. Close Info	Nominal Cold Resistance (Ohms)	0.03
Close Info	Interrupt Rating	35A@32VDC
Close Info	Interrupt Rating	35A@32VAC
Nominal Power Dissipation (W) Close Info	Nominal Power Dissipation (W)	0.1412
Nominal Voltage Drop (mV) Close Info	Nominal Voltage Drop (mV)	70.62
Operating Temperature (deg C) Close Info	Operating Temperature (deg C)	-55�C - + 90�C
Color or Alpha-Numeric code used to define the amp rating of the device for ease-of-maintenance and quality checks. Close Info	Marking Code	Geometric (see datasheet)
The part of a fuse enclosing the fuse elements and supporting the contacts. Body is also referred to as cartridge, tube, or case. Close Info	Body	Epoxy/Glass Substrate

Request a Sample

Check Distributor Stock Click Here

Find A Distributor

Design Support

Environmental Data

Environmental Info