pxxx2c_ SIDACtor® Protection Thyristors - Compak (Modified DO-214AA) Two-Chip SIDACTor® Device

Download Datasheet

Compak Two-chip SIDACtor® Device Data Sheet
PxxxxC_L.pdf
(160,848 bytes)
Last Uploaded: January 05, 2006

Compak (Modified DO-214AA) Two-Chip SIDACTor® Device

The modified DO-214AA SIDACtor® device provides low-cost, longitudinal protection.

SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).

Notes:

All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.

IPP is a repetitive surge rating and is guaranteed for the life of the product.

Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.

VDRM is measured at IDRM.

VS is measured at 100 V/µs.

Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.

Off-state capacitance is measured between Pins 1-3 at 1 MHz with a 2 V bias.

UL 60950 creepage requirements must be considered.

Electrical Characteristics

Access specifications, certifications, check availability and order parts below:

Check distributor stock availability by clicking on the [CHECK] link. View certification PDF files by clicking on the certification logo. View the part details by clicking on the part number. To order sample parts, click on the [ADD] link. Click on the 'Key' button to view definitions for each column header. Sort parts by clicking on the column you wish to sort by.

CatalogNo	V_S R-G (V)	Pins R-G	V_DRM R-G (V)	Pins T-G	V_S T-G (V)	V_DRM T-G (V)	V_S T-R (V)	V_DRM T-R (V)	Pins T-R	C_O 2V T-G MAX (pF)	C_O 2V R-G MAX (pF)	C_O 2V T-G MIN (pF)	C_O 2V R-G MIN (pF)	C_O 2V T-R MIN (pF)	C_O 2V T-R MAX (pF)	Stock	Sample Cart
P1402CA Obsolete: 2008-12-31	77	3-2	58	1-2	77	58	154	116	1-3	55	55	30	30	15	35	[Check]	[Add]
P1402CAL Obsolete: 2008-12-31	77	3-2	58	1-2	77	58	154	116	1-3	55	55	30	30	15	35	[Check]	[Add]
P1402CB Obsolete: 2008-12-31	77	3-2	58	1-2	77	58	154	116	1-3	55	55	30	30	15	35	[Check]	[Add]
P1402CBL Obsolete: 2008-12-31	77	3-2	58	1-2	77	58	154	116	1-3	55	55	30	30	15	35	[Check]	[Add]
P1602CA Obsolete: 2008-12-31	95	3-2	65	1-2	95	65	190	130	1-3	55	55	30	30	15	30	[Check]	[Add]
P1602CAL Obsolete: 2008-12-31	95	3-2	65	1-2	95	65	190	130	1-3	55	55	30	30	15	30	[Check]	[Add]
P1602CB Obsolete: 2008-12-31	95	3-2	65	1-2	95	65	190	130	1-3	55	55	30	30	15	30	[Check]	[Add]
P1602CBL Obsolete: 2008-12-31	95	3-2	65	1-2	95	65	190	130	1-3	55	55	30	30	15	30	[Check]	[Add]
P2202CA Obsolete: 2008-12-31	130	3-2	90	1-2	130	90	260	180	1-3	50	50	25	25	15	30	[Check]	[Add]
P2202CAL Obsolete: 2008-12-31	130	3-2	90	1-2	130	90	260	180	1-3	50	50	25	25	15	30	[Check]	[Add]
P2202CB Obsolete: 2008-12-31	130	3-2	90	1-2	130	90	260	180	1-3	50	50	25	25	15	30	[Check]	[Add]
P2202CBL Obsolete: 2008-12-31	130	3-2	90	1-2	130	90	260	180	1-3	50	50	25	25	15	30	[Check]	[Add]
P2702CA Obsolete: 2008-12-31	160	3-2	120	1-2	160	120	320	240	1-3	45	45	25	25	10	25	[Check]	[Add]
P2702CAL Obsolete: 2008-12-31	160	3-2	120	1-2	160	120	320	240	1-3	45	45	25	25	10	25	[Check]	[Add]
P2702CB Obsolete: 2008-12-31	160	3-2	120	1-2	160	120	320	240	1-3	45	45	25	25	10	25	[Check]	[Add]
P2702CBL Obsolete: 2008-12-31	160	3-2	120	1-2	160	120	320	240	1-3	45	45	25	25	10	25	[Check]	[Add]
P3002CA Obsolete: 2008-12-31	180	3-2	140	1-2	180	140	360	280	1-3	40	40	20	20	10	25	[Check]	[Add]
P3002CAL Obsolete: 2008-12-31	180	3-2	140	1-2	180	140	360	280	1-3	40	40	20	20	10	25	[Check]	[Add]
P3002CB Obsolete: 2008-12-31	180	3-2	140	1-2	180	140	360	280	1-3	40	40	20	20	10	25	[Check]	[Add]
P3002CBL Obsolete: 2008-12-31	180	3-2	140	1-2	180	140	360	280	1-3	40	40	20	20	10	25	[Check]	[Add]
P3602CA Obsolete: 2008-12-31	220	3-2	170	1-2	220	170	440	340	1-3	40	40	20	20	10	25	[Check]	[Add]
P3602CAL Obsolete: 2008-12-31	220	3-2	170	1-2	220	170	440	340	1-3	40	40	20	20	10	25	[Check]	[Add]
P3602CB Obsolete: 2008-12-31	220	3-2	170	1-2	220	170	440	340	1-3	40	40	20	20	10	25	[Check]	[Add]
P3602CBL Obsolete: 2008-12-31	220	3-2	170	1-2	220	170	440	340	1-3	40	40	20	20	10	25	[Check]	[Add]
P4202CA Obsolete: 2008-12-31	250	3-2	190	1-2	250	190	500	380	1-3	40	40	20	20	10	25	[Check]	[Add]
P4202CAL Obsolete: 2008-12-31	250	3-2	190	1-2	250	190	500	380	1-3	40	40	20	20	10	25	[Check]	[Add]
P4202CB Obsolete: 2008-12-31	250	3-2	190	1-2	250	190	500	380	1-3	40	40	20	20	10	25	[Check]	[Add]
P4202CBL Obsolete: 2008-12-31	250	3-2	190	1-2	250	190	500	380	1-3	40	40	20	20	10	25	[Check]	[Add]
P4802CA Obsolete: 2008-12-31	300	3-2	220	1-2	300	220	600	440	1-3	35	35	20	20	10	20	[Check]	[Add]
P4802CAL Obsolete: 2008-12-31	300	3-2	220	1-2	300	220	600	440	1-3	35	35	20	20	10	20	[Check]	[Add]
P4802CB Obsolete: 2008-12-31	300	3-2	220	1-2	300	220	600	440	1-3	35	35	20	20	10	20	[Check]	[Add]
P4802CBL Obsolete: 2008-12-31	300	3-2	220	1-2	300	220	600	440	1-3	35	35	20	20	10	20	[Check]	[Add]
P6002CA Obsolete: 2008-12-31	350	3-2	275	1-2	350	275	700	550	1-3	35	35	15	15	10	20	[Check]	[Add]
P6002CAL Obsolete: 2008-12-31	350	3-2	275	1-2	350	275	700	550	1-3	35	35	15	15	10	20	[Check]	[Add]
P6002CBL Obsolete: 2008-12-31	350	3-2	275	1-2	350	275	700	550	1-3	35	35	15	15	10	20	[Check]	[Add]

Find A Distributor

Technical Resources

Plant Certifications

Product Catalogs

Application Circuits

• Central Office Splitter : POTS Phone Lines

Environmental Data

Environmental Info

RoHS Date: 2004-09-01 00:00:00

	Telecom Design Guide - Mechanical Data (Chapter 9) Summary of all telecom product packaging information. Includes detailed package dimension information and a comprehensive summary of packing and lead form options. MD_Chap9_TDGEC1031.pdf (838 K)
	Telecom Design Guide - Reference Designs (Chapter 6) This section offers specific examples of how SIDACtor devices can be used to ensure long term operability of protected equipment and uninterrupted service during transient electrical activity. For additional line interface protection circuits, see "Regulatory Compliant Solutions". RD_Chap6_TDGEC1031.pdf (580 K)
	Telecom Design Guide - Technical Notes (Chapter 8) This section is offered to help answer any questions not addressed in the datasheets regarding Telecom protection devices and their implementation. TN_Chap8_TDGEC1031.pdf (423 K)
	Telecom Design Guide - Regulatory Requirement (Chapter 7) This section is a paraphrase of existing regulatory documents and does not cover the listed regulatory requirements in their entirety. This information is intended to be used only as a reference. For exact specifications, obtain the referenced document from the appropriate source. RReq_Chap7_TDGEC1031.pdf (407 K)

	Irving and Matamoros ISO 9001:2000 Certificate Littelfuse-Irving-Matamoros_ISO9001-2000_040907.pdf (119 K)
	Irving ISO 14001 Littelfuse_Irving_ISO14001.pdf (573 K)