Part Number: P1602CA
Series: pxxx2c_
- Compak Two-chip SIDACtor® Device Data Sheet
- PxxxxC_L.pdf
- (160,848 bytes)
- Last Uploaded: January 05, 2006
Compak (Modified DO-214AA) Two-Chip SIDACTor® Device
The modified DO-214AA SIDACtor® device provides low-cost, longitudinal protection.
SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).
Notes:All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
IPP is a repetitive surge rating and is guaranteed for the life of the product.
Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
VDRM is measured at IDRM.
VS is measured at 100 V/µs.
Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
Off-state capacitance is measured between Pins 1-3 at 1 MHz with a 2 V bias.
UL 60950 creepage requirements must be considered.
SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).
Notes:
Electrical Characteristics
| Help | Property | Value |
|---|---|---|
 |
Switching Voltage Ring to Ground (V) | 95 |
|
Pins Ring to Ground | 3-2 |
|
Peak Off-State Voltage Ring to Ground (V) | 65 |
|
Pins Tip to Ground | 1-2 |
|
Switching Voltage Tip to Ground (V) | 95 |
|
Peak Off-State Voltage Tip to Ground (V) | 65 |
|
Switching Voltage Tip to Ring (V) | 190 |
|
Peak Off-State Voltage Tip to Ring (V) | 130 |
|
Pins Tip to Ring | 1-3 |
|
Max Capacitance Tip to Ground | 55 |
|
Max Capacitance Ring to Ground | 55 |
|
Min Capacitance Tip to Ground | 30 |
|
Min Capacitance Ring to Ground (pF) | 30 |
|
Min Capacitance Tip to Ring (pF) | 15 |
|
Max Capacitance Tip to Ring (pF) | 30 |
