pxxx6u_ SIDACtor® Protection Thyristors - Multiport Balanced SIDACtor® Device

Download Datasheet

SIDACtor Balanced Multiport Series, MS-013
Littelfuse-SIDACtor-BalancedMultiportMS-013.pdf
(154,573 bytes)
Last Uploaded: February 26, 2011

Multiport Balanced SIDACtor® Device

This multiport balanced protector is a surface mount alternative to the modified TO-220 package. It is based on a six-pin surface mount SOIC package and uses Littelfuse's patented "Y" (US Patent 4,905,119) configuration. It is available in surge current ratings up to 500A.

SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).

Notes:

All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
IPP is a repetitive surge rating and is guaranteed for the life of the product.
Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
VDRM is measured at IDRM.
VS is measured at 100 V/µs.
Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
Off-state capacitance is measured between Pins 1-2 and 3-2 at 1 MHz with a 2 V bias and is a typical value for "UA" product. "UB" and "UC" capacitance is approximately 10 pF higher.
Device is designed to meet balance requirements of GTS 8700 and GR 974.

Electrical Characteristics

Access specifications, certifications, check availability and order parts below:

Check distributor stock availability by clicking on the [CHECK] link. View certification PDF files by clicking on the certification logo. View the part details by clicking on the part number. To order sample parts, click on the [ADD] link. Click on the 'Key' button to view definitions for each column header. Sort parts by clicking on the column you wish to sort by.

CatalogNo	Pins R-G	V_S R-G (V)	V_DRM R-G (V)	Pins T-G	V_S T-G (V)	V_DRM T-G (V)	V_DRM T-R (V)	Pins T-R	V_S T-R (V)	C_O 2V T-G MAX (pF)	C_O 2V R-G MAX (pF)	C_O 2V T-G MIN (pF)	C_O 2V R-G MIN (pF)	C_O 2V T-R MAX (pF)	C_O 2V T-R MIN (pF)	Stock	Sample Cart
P1556UA Obsolete: 2009-02-01	1-2,4-5	180	130	3-2,6-5	180	130	130	3-1,6-4	180	55	55	25	25	35	15	[Check]	[Add]
P1556UAL	1-2,4-5	180	130	3-2,6-5	180	130	130	3-1,6-4	180	55	55	25	25	35	15	[Check]	[Add]
P1556UB Obsolete: 2009-02-01	1-2,4-5	180	130	3-2,6-5	180	130	130	3-1,6-4	180	55	55	25	25	35	15	[Check]	[Add]
P1556UBL	1-2,4-5	180	130	3-2,6-5	180	130	130	3-1,6-4	180	55	55	25	25	35	15	[Check]	[Add]
P1556UC Obsolete: 2009-02-01	1-2,4-5	180	130	3-2,6-5	180	130	130	3-1,6-4	180	55	55	30	30	35	20	[Check]	[Add]
P1556UCL	1-2,4-5	180	130	3-2,6-5	180	130	130	3-1,6-4	180	55	55	30	30	35	20	[Check]	[Add]
P1806UA Obsolete: 2009-02-01	1-2,4-5	210	150	3-2,6-5	210	150	150	3-1,6-4	210	50	50	25	25	35	15	[Check]	[Add]
P1806UAL	1-2,4-5	210	150	3-2,6-5	210	150	150	3-1,6-4	210	50	50	25	25	35	15	[Check]	[Add]
P1806UB Obsolete: 2009-02-01	1-2,4-5	210	150	3-2,6-5	210	150	150	3-1,6-4	210	50	50	25	25	35	15	[Check]	[Add]
P1806UBL	1-2,4-5	210	150	3-2,6-5	210	150	150	3-1,6-4	210	50	50	25	25	35	15	[Check]	[Add]
P1806UC Obsolete: 2009-02-01	1-2,4-5	210	150	3-2,6-5	210	150	150	3-1,6-4	210	50	50	30	30	35	15	[Check]	[Add]
P1806UCL	1-2,4-5	210	150	3-2,6-5	210	150	150	3-1,6-4	210	50	50	30	30	35	15	[Check]	[Add]
P2106UA Obsolete: 2009-02-01	1-2,4-5	250	170	3-2,6-5	250	170	170	3-1,6-4	250	45	45	20	20	30	10	[Check]	[Add]
P2106UAL	1-2,4-5	250	170	3-2,6-5	250	170	170	3-1,6-4	250	45	45	20	20	30	10	[Check]	[Add]
P2106UB Obsolete: 2009-02-01	1-2,4-5	250	170	3-2,6-5	250	170	170	3-1,6-4	250	45	45	20	20	30	10	[Check]	[Add]
P2106UBL	1-2,4-5	250	170	3-2,6-5	250	170	170	3-1,6-4	250	45	45	20	20	30	10	[Check]	[Add]
P2106UC Obsolete: 2009-02-01	1-2,4-5	250	170	3-2,6-5	250	170	170	3-1,6-4	250	45	45	30	30	30	15	[Check]	[Add]
P2106UCL	1-2,4-5	250	170	3-2,6-5	250	170	170	3-1,6-4	250	45	45	30	30	30	15	[Check]	[Add]
P2356UA Obsolete: 2009-02-01	1-2,4-5	270	200	3-2,6-5	270	200	200	3-1,6-4	270	45	45	20	20	30	10	[Check]	[Add]
P2356UAL	1-2,4-5	270	200	3-2,6-5	270	200	200	3-1,6-4	270	45	45	20	20	30	10	[Check]	[Add]
P2356UB Obsolete: 2009-02-01	1-2,4-5	270	200	3-2,6-5	270	200	200	3-1,6-4	270	45	45	20	20	30	10	[Check]	[Add]
P2356UBL	1-2,4-5	270	200	3-2,6-5	270	200	200	3-1,6-4	270	45	45	20	20	30	10	[Check]	[Add]
P2356UC Obsolete: 2009-02-01	1-2,4-5	270	200	3-2,6-5	270	200	200	3-1,6-4	270	45	45	25	25	30	15	[Check]	[Add]
P2356UCL	1-2,4-5	270	200	3-2,6-5	270	200	200	3-1,6-4	270	45	45	25	25	30	15	[Check]	[Add]
P2706UA Obsolete: 2009-02-01	1-2,4-5	300	230	3-2,6-5	300	230	230	3-1,6-4	300	40	40	20	20	30	10	[Check]	[Add]
P2706UAL	1-2,4-5	300	230	3-2,6-5	300	230	230	3-1,6-4	300	40	40	20	20	30	10	[Check]	[Add]
P2706UB Obsolete: 2009-02-01	1-2,4-5	300	230	3-2,6-5	300	230	230	3-1,6-4	300	40	40	20	20	30	10	[Check]	[Add]
P2706UBL	1-2,4-5	300	230	3-2,6-5	300	230	230	3-1,6-4	300	40	40	20	20	30	10	[Check]	[Add]
P2706UC Obsolete: 2009-02-01	1-2,4-5	300	230	3-2,6-5	300	230	230	3-1,6-4	300	40	40	25	25	30	15	[Check]	[Add]
P2706UCL	1-2,4-5	300	230	3-2,6-5	300	230	230	3-1,6-4	300	40	40	25	25	30	15	[Check]	[Add]
P3206UA Obsolete: 2009-02-01	1-2,4-5	350	270	3-2,6-5	350	270	270	3-1,6-4	350	40	40	20	20	30	10	[Check]	[Add]
P3206UAL	1-2,4-5	350	270	3-2,6-5	350	270	270	3-1,6-4	350	40	40	20	20	30	10	[Check]	[Add]
P3206UB Obsolete: 2009-02-01	1-2,4-5	350	270	3-2,6-5	350	270	270	3-1,6-4	350	40	40	20	20	30	10	[Check]	[Add]
P3206UBL	1-2,4-5	350	270	3-2,6-5	350	270	270	3-1,6-4	350	40	40	20	20	30	10	[Check]	[Add]
P3206UC Obsolete: 2009-02-01	1-2,4-5	350	270	3-2,6-5	350	270	270	3-1,6-4	350	40	40	25	25	30	15	[Check]	[Add]
P3206UCL	1-2,4-5	350	270	3-2,6-5	350	270	270	3-1,6-4	350	40	40	25	25	30	15	[Check]	[Add]
P3406UA Obsolete: 2009-02-01	1-2,4-5	400	300	3-2,6-5	400	300	300	3-1,6-4	400	35	35	15	15	25	10	[Check]	[Add]
P3406UAL	1-2,4-5	400	300	3-2,6-5	400	300	300	3-1,6-4	400	35	35	15	15	25	10	[Check]	[Add]
P3406UB Obsolete: 2009-02-01	1-2,4-5	400	300	3-2,6-5	400	300	300	3-1,6-4	400	35	35	15	15	25	10	[Check]	[Add]
P3406UBL	1-2,4-5	400	300	3-2,6-5	400	300	300	3-1,6-4	400	35	35	15	15	25	10	[Check]	[Add]
P3406UC Obsolete: 2009-02-01	1-2,4-5	400	300	3-2,6-5	400	300	300	3-1,6-4	400	35	35	20	20	25	15	[Check]	[Add]
P3406UCL	1-2,4-5	400	300	3-2,6-5	400	300	300	3-1,6-4	400	35	35	20	20	25	15	[Check]	[Add]
P5106UA Obsolete: 2009-02-01	1-2,4-5	600	420	3-2,6-5	600	420	420	3-1,6-4	600	30	30	10	10	20	5	[Check]	[Add]
P5106UAL	1-2,4-5	600	420	3-2,6-5	600	420	420	3-1,6-4	600	30	30	10	10	20	5	[Check]	[Add]
P5106UB Obsolete: 2009-02-01	1-2,4-5	600	420	3-2,6-5	600	420	420	3-1,6-4	600	30	30	10	10	20	5	[Check]	[Add]
P5106UBL	1-2,4-5	600	420	3-2,6-5	600	420	420	3-1,6-4	600	30	30	10	10	20	5	[Check]	[Add]
P5106UC Obsolete: 2009-02-01	1-2,4-5	600	420	3-2,6-5	600	420	420	3-1,6-4	600	30	30	20	20	20	10	[Check]	[Add]
P5106UCL	1-2,4-5	600	420	3-2,6-5	600	420	420	3-1,6-4	600	30	30	20	20	20	10	[Check]	[Add]

Find A Distributor

Technical Resources

Plant Certifications

Product Catalogs

Application Circuits

• Central Office Splitter : POTS Phone Lines

Environmental Data

Environmental Info

RoHS Date: 2004-09-01 00:00:00
ICP Test Reports
RoHS Compliance 6-PIN 2006-10-16.pdf
China RoHS Reports
ChinaRoHS SIDACtor Battrax 6PIN MS-013-Compliant.pdf
ChinaRoHS SIDACtor Battrax 6PIN MS-013-Non Compliant-.pdf

	Telecom Design Guide - Mechanical Data (Chapter 9) Summary of all telecom product packaging information. Includes detailed package dimension information and a comprehensive summary of packing and lead form options. MD_Chap9_TDGEC1031.pdf (838 K)
	Telecom Design Guide - Reference Designs (Chapter 6) This section offers specific examples of how SIDACtor devices can be used to ensure long term operability of protected equipment and uninterrupted service during transient electrical activity. For additional line interface protection circuits, see "Regulatory Compliant Solutions". RD_Chap6_TDGEC1031.pdf (580 K)
	Telecom Design Guide - Technical Notes (Chapter 8) This section is offered to help answer any questions not addressed in the datasheets regarding Telecom protection devices and their implementation. TN_Chap8_TDGEC1031.pdf (423 K)
	Telecom Design Guide - Regulatory Requirement (Chapter 7) This section is a paraphrase of existing regulatory documents and does not cover the listed regulatory requirements in their entirety. This information is intended to be used only as a reference. For exact specifications, obtain the referenced document from the appropriate source. RReq_Chap7_TDGEC1031.pdf (407 K)

	Irving and Matamoros ISO 9001:2000 Certificate Littelfuse-Irving-Matamoros_ISO9001-2000_040907.pdf (119 K)
	Irving ISO 14001 Littelfuse_Irving_ISO14001.pdf (573 K)