1.5KE82 TVS Diodes - 1500W Axial Leaded Transient Voltage Suppression (TVS) Diode - 1.5KE Series

Part Number: 1.5KE82

Series: 1.5KE

1.5KE Series Data Sheet
Littelfuse_TVS-Diode_1.5KE.pdf
(1,008,869 bytes)
Last Uploaded: April 22, 2012

1500W Axial Leaded Transient Voltage Suppression (TVS) Diode - 1.5KE Series

The 1.5KE Series is designed specifically to protect sensitive electronic equipment from voltage transients induced by lightning and other transient voltage events.

Halogen-Free and RoHS compliant
Typical maximum temperature coefficient ΔV_BR = 0.1% × V_BR@25°C
Glass passivated junction
1500W peak pulse capability at 10×1000μs waveform, repetition rate (duty cycles):0.01%
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Low incremental surge resistance
Typical IR less than 1μA above 13V
High temperature soldering guaranteed: 265°C./10 seconds/ 0.375”,(9.5mm) lead length, 51bs., (2.3kg) tension
Plastic package has Underwriters Laboratory Flammability classification 94V-O
Matte Tin Lead–free plated

Help	Property	Value
In the case of a uni-directional TVS diode, this is the maximum peak voltage that may be applied in the blocking direction with no significant current flow. In the case of a bi-directional transient, it applies in either direction. It is the same definition as Maximum off-state voltage and maximum working voltage. Close Info	Reverse Standoff Voltage (V_R) (V_so)	70.1
Watts Close Info	Watts (W)	1500
Maximum pulse current which can be applied repetitively. Usually a 10x1000µs double exponential waveform, but can also be 8x20µs, if stated. Close Info	Peak Pulse Current (Ipp) 10x1000 (A)	13.5
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (MIN V_BR@I_T ) (V)	73.8
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (V_BR@I_T) (V)	90.2
This is the peak voltage appearing across the diode when measured at I_PP. Close Info	Max Clamp Voltage (Vc) (V)	118.65
Anode cathode principal current that may be allowed under stated conditions, usually the full-cycle RMS current. Close Info	On-State Current (I_T) (mA)	1
Maximum Reverse Leakage Current. Measured @ V_SO. Close Info	Ir @Vso( μA)	5
Maximum Temperature Close Info	Max Temperature (deg C)	175