SLD16-018 TVS Diodes - SLD® Series - High Power Automotive TVS Diode For Protection Against Load Dump Conditions

Part Number: SLD16-018

Series: SLD

SLD Series Data Sheet
Littelfuse_TVS-Diode_SLD.pdf
(1,153,884 bytes)
Last Uploaded: December 04, 2011

SLD® Series - High Power Automotive TVS Diode For Protection Against Load Dump Conditions

Designed to provide precision overvoltage protection for sensitive electronics, the SLD Series is packaged in a highly reliable industry standard P600 axial leaded package. Primary applications for the SLD series include protection against damage due to inductive load switching and alternator load dump.

Features:

Halogen-Free and RoHS compliant
Typical maximum temperature coefficient ΔVBR = 0.1% x VBR@25°C x ΔT
Glass passivated chip junction in P600 package
ISO 7637-2 Level 4 Impulse 5a; 2200W peak pulse capability at 100μs × 150ms waveform, repetition rate (duty cycles): 0.01%
Fast response time: typically less than 1.0ps from 0 Volts to BV min
Excellent clamping capability
Low incremental surge resistance
High temperature soldering guaranteed: 260°C/40 seconds / 0.375”,(9.5mm) lead length, 5 lbs., (2.3kg) tension
Plastic package has Underwriters Laboratory Flammability classification 94V-O

Help	Property	Value
In the case of a uni-directional TVS diode, this is the maximum peak voltage that may be applied in the blocking direction with no significant current flow. In the case of a bi-directional transient, it applies in either direction. It is the same definition as Maximum off-state voltage and maximum working voltage. Close Info	Reverse Standoff Voltage (V_R) (V_so)	16
Maximum pulse current which can be applied repetitively (8x20µs). Close Info	Peak Pulse Current (Ipp) 8x20μs (A)	50000
Maximum pulse current which can be applied repetitively. Usually a 10x1000µs double exponential waveform, but can also be 8x20µs, if stated. Close Info	Peak Pulse Current (Ipp) 10x1000 (A)	76
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (MIN V_BR@I_T ) (V)	18
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (V_BR@I_T) (V)	22
This is the peak voltage appearing across the diode when measured at I_PP. Close Info	Max Clamp Voltage (Vc) (V)	28.6
Anode cathode principal current that may be allowed under stated conditions, usually the full-cycle RMS current. Close Info	On-State Current (I_T) (mA)	1
Maximum Reverse Leakage Current. Measured @ V_SO. Close Info	Ir @Vso( μA)	10
Maximum Temperature Close Info	Max Temperature (deg C)	175

Request a Sample

Check Distributor Stock Click Here

Find A Distributor

Design Support

Certification

UL_QVGQ2.E230531
9/13/08
UL_QVGQ2.E230531.pdf (348 K)

Electrical Characteristics

Design Support

Environmental Data