1KSMBJ6.8 TVS Diodes - 1000W Surface Mount TVS Diode - 1KSMBJ Series

Part Number: 1KSMBJ6.8

Replaced By 1KSMB6.8

1000W Surface Mount TVS Diode - 1KSMBJ Series

Help	Property	Value
In the case of a uni-directional TVS diode, this is the maximum peak voltage that may be applied in the blocking direction with no significant current flow. In the case of a bi-directional transient, it applies in either direction. It is the same definition as Maximum off-state voltage and maximum working voltage. Close Info	Reverse Standoff Voltage (V_R) (V_so)	5.5
Watts Close Info	Watts (W)	1000
Maximum pulse current which can be applied repetitively. Usually a 10x1000µs double exponential waveform, but can also be 8x20µs, if stated. Close Info	Peak Pulse Current (Ipp) 10x1000 (A)	92.5
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (MIN V_BR@I_T ) (V)	6.12
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (V_BR@I_T) (V)	7.46
This is the peak voltage appearing across the diode when measured at I_PP. Close Info	Max Clamp Voltage (Vc) (V)	10.8
Anode cathode principal current that may be allowed under stated conditions, usually the full-cycle RMS current. Close Info	On-State Current (I_T) (mA)	10
Maximum Reverse Leakage Current. Measured @ V_SO. Close Info	Ir @Vso( μA)	1000
Maximum Temperature Close Info	Max Temperature (deg C)	150

Design Support