P6SMBJ9.1 TVS Diodes - 600W Surface Mount TVS Diode - P6SMBJ Series

Part Number: P6SMBJ9.1

Replaced By P6SMB9.1

600W Surface Mount TVS Diode - P6SMBJ Series

Help	Property	Value
In the case of a uni-directional TVS diode, this is the maximum peak voltage that may be applied in the blocking direction with no significant current flow. In the case of a bi-directional transient, it applies in either direction. It is the same definition as Maximum off-state voltage and maximum working voltage. Close Info	Reverse Standoff Voltage (V_R) (V_so)	7.37
Watts Close Info	Watts (W)	600
Maximum pulse current which can be applied repetitively. Usually a 10x1000µs double exponential waveform, but can also be 8x20µs, if stated. Close Info	Peak Pulse Current (Ipp) 10x1000 (A)	45.5
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (MIN V_BR@I_T ) (V)	8.19
Breakdown voltage measured at a specified DC test current, typically 1mA. Usually a minimum and maximum is specified. Close Info	Breakdown Voltage (V_BR@I_T) (V)	10.01
This is the peak voltage appearing across the diode when measured at I_PP. Close Info	Max Clamp Voltage (Vc) (V)	14.07
Anode cathode principal current that may be allowed under stated conditions, usually the full-cycle RMS current. Close Info	On-State Current (I_T) (mA)	1
Maximum Reverse Leakage Current. Measured @ V_SO. Close Info	Ir @Vso( μA)	50
Maximum Temperature Close Info	Max Temperature (deg C)	150