V251HB34 Varistors - HB34 Series - High Energy Industrial Varistor Series

Part Number: V251HB34

Series: HB34

HB34, HF34, and HG34 Series Data Sheet
Littelfuse_MOV_HB34_HF34_HG34.pdf
(494,795 bytes)
Last Uploaded: February 21, 2011

HB34 Series - High Energy Industrial Varistor Series

The HB34 Series of transient surge suppressors are industrial high-energy Metal-Oxide Varistors (MOVs).

They are designed to proide surge suppression in the AC mains outdoor and service entrance environment (distribution panels) of buildings.
HB34 applications also include industrial heavy motors, controls, and power supplies such as used in the oil-drilling, mining, and transportation fields, including HVAC and motor/generator applications.
The HB34 Series provides rigid terminals for through-hole solder mounting on printed circuit boards, thereby eliminating the need for screw mounting.

Help	Property	Value
Package Size/Form Factor Close Info	Package Size	34mm
This is the maximum continuous sinusoidal voltage, which may be applied to the MOV. This voltage may be applied at any temperature up to the maximum operating temperature of 85°C. Close Info	VMAX AC (V)	250
This is the maximum continuous DC voltage, which may be applied to the device. Close Info	Max Rated DC Voltage	330
This is the maximum rated transient energy, which may be dissipated for a single current pulse at a specified impulse and duration (2µs), with the rated V_RMS applied, without causing device failure. Close Info	Surge Energy (WTM) (J)	370
This is the maximum peak current, which may be applied for an 8x20µs impulse, with rated line voltage also applied, without causing greater than 10% shift in nominal voltage. Close Info	Peak Pulse Current (I_TM) 1xAmps (A)	40000
This is the voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the ImA point and has specified minimum and maximum voltage ratings. Close Info	Nominal DC Voltage (V_NDC) (V)	390
This is the minimum voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the 1mA point and has specified minimum and maximum voltage ratings. Close Info	V_NDC MIN (V)	354
This is the peak voltage appearing across the MOV when measured at conditions of specified pulse current amplitude and specified waveform (8x20µs). Close Info	Max Clamp Voltage (Vc) (V)	650
This is the maximum voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the 1mA point and has specified minimum and maximum voltage ratings. Close Info	VNDC MAX (V)	429
Typical Capacitance (pF) Close Info	Typ Capacitance (pF)	5000
Clamping Polarity Close Info	Clamp Polarity	Bi-directional

Request a Sample

Check Distributor Stock Click Here

Find A Distributor

Design Support

Certification

CSA_2221-01 091788
1/7/10
CSA_2221-01091788.pdf (1,161 K)

Plant Certifications

Environmental Data

Environmental Info

RoHS Date: 2006-07-31 00:00:00
PbFree Date: 2006-07-31 00:00:00
ICP Test Reports
RoHSHF test report HA HB HC HF HG DHB Varistor Series 7-8-2010.pdf
China RoHS Reports
ChinaRoHS HA- HB- HC- HF- HG- DHB Varistor Series.pdf

	Dongguan, BeiCe ISO 14001-2004 MOV Factory Littelfuse_Dongguan-BeiCe-MOV_ISO14001-2004.pdf (103 K)
	Dongguan, BeiCe ISO 9001-2000 MOV/MLV Factory Littelfuse_Dongguan-BeiCe-MOV_ISO9001-2000.pdf (773 K)
	Dongguan, BeiCe ISO TS16949 Littelfuse_Dongguan-BeiCe-MOV_ISO-TS16949.pdf (400 K)

Electrical Characteristics

Design Support

Environmental Data