V100RA8 Varistors - RA Series - Low Profile Varistor

Part Number: V100RA8

Series: RA

RA Series Data Sheet
Littelfuse_MOV_RA.pdf
(247,693 bytes)
Last Uploaded: November 11, 2009

RA Series - Low Profile Varistor

The RA Series transient surge suppressors are varistors (MOVs) supplied in a low-profile box that features a precise seating plane to increase mechanical stability for secure circuit-board mounting. This feature makes these devices suitable for industrial applications critical to vibration. Their construction permits operation up to 125�C (ambient) without derating.

The RA series are available in voltage ratings up to 275V V M(AC)RMS and energy levels up to 140J.
These varistors are used in automotive, motor control, telecommunication, and military applications.

Help	Property	Value
Package Size/Form Factor Close Info	Package Size	8mm
This is the maximum continuous sinusoidal voltage, which may be applied to the MOV. This voltage may be applied at any temperature up to the maximum operating temperature of 85°C. Close Info	VMAX AC (V)	60
This is the maximum continuous DC voltage, which may be applied to the device. Close Info	Max Rated DC Voltage	81
This is the maximum rated transient energy, which may be dissipated for a single current pulse at a specified impulse and duration (2µs), with the rated V_RMS applied, without causing device failure. Close Info	Surge Energy (WTM) (J)	5
This is the maximum peak current, which may be applied for an 8x20µs impulse, with rated line voltage also applied, without causing greater than 10% shift in nominal voltage. Close Info	Peak Pulse Current (I_TM) 1xAmps (A)	1200
This is the voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the ImA point and has specified minimum and maximum voltage ratings. Close Info	Nominal DC Voltage (V_NDC) (V)	100
This is the minimum voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the 1mA point and has specified minimum and maximum voltage ratings. Close Info	V_NDC MIN (V)	90
This is the peak voltage appearing across the MOV when measured at conditions of specified pulse current amplitude and specified waveform (8x20µs). Close Info	Max Clamp Voltage (Vc) (V)	165
This is the maximum voltage at which the device changes from the off state to the on state and enters its conduction mode of operation. This voltage is characterized at the 1mA point and has specified minimum and maximum voltage ratings. Close Info	VNDC MAX (V)	110
Typical Capacitance (pF) Close Info	Typ Capacitance (pF)	400
Clamping Polarity Close Info	Clamp Polarity	Bi-directional

Request a Sample

Check Distributor Stock Click Here

Find A Distributor

Design Support

Certification

CSA_2221-01 091788
1/7/10
CSA_2221-01091788.pdf (1,161 K)

UL_VZCA2-E320116
2/4/11
UL_VZCA2-E320116.pdf (1,362 K)

Plant Certifications

Environmental Data

Environmental Info

	CSA_2221-01 091788 1/7/10 CSA_2221-01091788.pdf (1,161 K)
	UL_VZCA2-E320116 2/4/11 UL_VZCA2-E320116.pdf (1,362 K)

	Dongguan, BeiCe ISO 14001-2004 MOV Factory Littelfuse_Dongguan-BeiCe-MOV_ISO14001-2004.pdf (103 K)
	Dongguan, BeiCe ISO 9001-2000 MOV/MLV Factory Littelfuse_Dongguan-BeiCe-MOV_ISO9001-2000.pdf (773 K)
	Dongguan, BeiCe ISO TS16949 Littelfuse_Dongguan-BeiCe-MOV_ISO-TS16949.pdf (400 K)

Electrical Characteristics

Design Support

Environmental Data