FlexMod Battery Isolator Controller Series - Preserves Starting Battery Voltage by Isolating the Auxiliary Battery when System Voltage Drops

48540
   
The FlexMod Smart Battery Isolator Controller unit monitors two battery banks and controls one or more relays or contactors to make sure starting power is protected by isolating the starting and auxiliary battery banks. Turns any electromecanical solenoid or relay into a battery isolator and works with ECM controlled alternators. System will disconnect load after 1 sec of excessive current, and auto-recover after 10 seconds.

Programmable unit can be setup with custom parameters by select authorized distributors.

Features & Benefits

  • Compact design (4” x 3” x 1”) unit is waterproof, dustproof and vibration-proof.  Mounts anywhere on a vehicle, even places where road-splash is a problem. Sealed to IP67 standard. 
  • Isolates main and auxiliary batteries when system voltage drops below 12.7 Vdc, and automatically reconnects battery banks at 13.2 Vdc. Preserves starting power; eliminates downtime and jump starts due to dead batteries.
  • Start assist feature provides boost to starting battery, when needed.
  • Compatible with modern electronically controlled alternators (some diode Battery Isolators are not). Smart Battery Isolator Controller eliminates false battery warnings created by diode isolators.
  • Status light output drives remote light, informing operator when banks are connected
  • Unit is autoranging - senses 12V or 24V systems.
Mounting: Four 9/32" (7.2mm) dia. holes
Size: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)

Ordering Information

Part Number  Description Harness Included Programmable
48540  Unit Only
48540-01  Unit with Harness
48740  Programmable Unit Only
48740-01  Programmable Unit with Harness

Access specifications, certifications, check availability and order parts below

Catalog #CaseConnectorDescriptionDetailsDimensionsDisconnect voltage (12V)Disconnect voltage (24V)HumidityInductive transientIngress ProtectionCompare
48540Blue Thermoplastic8-pin Sealed Deutsch typeFlexMod Battery Isolator Controller Unit10 A4 x 2.7 x 1.3112.7 V typical25.4 V typical0 to 90% RH+/- 600 VIP67
48540-01Blue Thermoplastic8-pin Sealed Deutsch typeFlexMod Battery Isolator Controller Unit and 12805 Harness10 A4 x 2.7 x 1.3112.7 V typical25.4 V typical0 to 90% RH+/- 600 VIP67
48740Blue Thermoplastic8-pin Sealed Deutsch typeProgrammable FlexMod Battery Isolator Controller Unit10 A4 x 2.7 x 1.31Programmable AttributeProgrammable Attribute0 to 90% RH+/- 600 VIP67
48740-01Blue Thermoplastic8-pin Sealed Deutsch typeProgrammable FlexMod Battery Isolator Controller Unit and Harness10 A4 x 2.7 x 1.31Programmable AttributeProgrammable Attribute0 to 90% RH+/- 600 VIP67

  • Showing 1 items