24452 - Forward and Reverse Relay Modules Series

24452
Roll Over to Zoom

This module is ideal for tarp or lift applications. It can also be used on hoist, hatches, winches, snowplows, intake/exhaust fans, vehicle outriggers and other reversing applications. When the appropriate control circuit is energized with a pulse it will reverse the direction of the motor.

High performance silver tin oxide contacts assure long cycle life.
  • 70A at 12V DC intermittent, max On time 5 mins; Off time 3 mins; 50A at 12V DC continuous.
  • Load current inrush: 150A. Pull-in voltage 7.8V max.
  • Low coil current draw. Coil resistance 82Ω ±10%.
  • Vibration resistance: 10-55Hz. Double amplitude 1.5mm.
  • Environmental: -40C to 85C. Rust and moisture-resistant plastic housing.
  • Fully sealed to IP-67 with high strength epoxy for total moisture protection.
  • Ignition protected.
  • Tin-plated brass studs and hardware for corrosion resistance.
  • Dielectric strength: 500V RMS between coil and contact.
  • For intermittent operation, control switch should be Mom On-Off-Mom On; for continuous operation On-Off-On.
Voltage: 12 Vdc
Amps:
     Continuous:
     Intermittent:

50 A
70 A (5 mins max on time; 3 mins off time)
Contact Materials: Silver
Contact Threads: 5/16"-24 Threads hex nuts and lock washers included
Terminal Material: Tin-plated brass
IP Rating: IP67
Property (Mouseover for details) Value
Special applications Reversing
Contacts Silver
Housing Plastic
Voltage rating 12 Vdc
Terminals Studs
Continuous current 50 A
Intermittent time Max 5 min On - 3 min Off