FS219-45 - FS200 Series

Series: FS200 Questions? Contact Littelfuse Support
Littelfuse Flashers
Roll Over to Zoom
The FS200 Series may be used to control inductive, incandescent, or resistive loads. Input voltages of 12, 24, 36, 48, or 110VDC are available. Factory fixed flash rate of 90 FPM or may be ordered with a fixed custom flash rate ranging from 10 to 180 FPM. Encapsulation provides protection against shock, vibration, and humidity. Uniform performance, high inrush current capability, and low RFI, make this series ideal for general industrial applications.


Operation
Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed.
Reset: Removing input voltage resets the output and the sequence to T2.

Property (Mouseover for details) Value
Input Voltage (V) 12VDC
Input Tolerance (%) ±20%
Output Load Type Inductive resistive or incandescent
Output Load Rating (VA) 3A maximum load rating steady state
Flash Rate (fpm) 45FPM ±10%
On/Off Ratio (%) ≌50%
Circuitry Encapsulated
Inush 10 times steady state current
Open State Leakage Current (A) ≤250uA
Operating Temperature -20° to 60° C (-4° F to 140° F)
Storage Temperature (F/C) -40° to 85°C (-40°F to 185°F)
Mounting Method Surface mount with one #10 (M5 x 0.8) screw
Termination Type 0.25 in. (6.35mm) male quick connect terminals
Dimensions 2.00 x 2.00 x 1.21 in. (50.8 x 50.8 x 30.7mm)
Weight (lbs/g) ≌2.2oz (62g)
Sample capable No