Tower Lighting


  • Littelfuse Tower and Obstruction Lighting Controls

    FA / FS

  • The FA and FS Series Flashers have proven their reliability through years of use on communication to...More

  • Input
    Voltage (V):
     120VAC, 230VAC

  • Output Load Rating (VA): 2500W @ 120 VAC, 5000W @ 230 VAC, 2500W, 5000W

  • Flash Rate (fpm): 30 ±10 FPM, 30FPM ±10%

  • Littelfuse Tower and Obstruction Lighting Controls

    FB

  • The FB9L is a universal lamp alarm relay designed to sense the failure of flashing LED beacon lamps....More

  • Input
    Voltage (V):
     120 - 230VAC

  • Output
    Form:
     3 total - 2 relay 1 solid state

  • Trip Delay Range: Flasher failure: Fixed at 6s; -0/+40; Lamp failure: Fixed at 10s; -0/+40%

  • Littelfuse FB Flasher

    FB120A / FB230A

  • The FB120A and FB230A are used to monitor the operation of one two-lamp incandescent beacon and one ...More

  • Input
    Voltage (V):
     120VAC, 230VAC

  • Output
    Form:
     3 total - 1 relay 2 solid state

  • Trip Delay Range: Flasher failure: Fixed at 6s; -0/+40; Lamp failure: Fixed at 10s; -0/+40%

  • Littelfuse Tower and Obstruction Lighting Controls

    FS100

  • The FS100 Series (low amp) may be used to control inductive, incandescent or resistive loads. This s...More

  • Input
    Voltage (V):
     120VAC, 24VAC

  • Output Load Rating (VA): Fullwave AC: 1A steady state, Halfwave rectified AC: 2A steady state maximum

  • Flash Rate (fpm): 75FPM ±20%, 45FPM ±20%, 60FPM ±20%

  • Littelfuse Tower and Obstruction Lighting Controls

    PCR

  • The PCR Series of photo control is a combination of precision electronic circuitry, electromechanica...More

  • Input
    Voltage (V):
     120VAC, 230VAC

  • Output
    Form:
     Two SPST NO 20A contacts; 1hp @ 120VAC 2.5hp @ 240VAC

  • Information Not Available

  • Littelfuse Tower and Obstruction Lighting Controls

    SCR

  • The SCR series are Tower and Obstruction Lighting Controls used in a variety of applications. The SC...More

  • Input
    Voltage (V):
     120VAC, 230VAC

  • Output Voltage: ≤125W@120VAC, ≤250W @ 240VAC

  • Output
    Form:
     SDPT

  • SCR9L

  • The SCR9L is a universal lamp alarm relay designed to sense the failure of flashing or steady LED be...More

  • Input
    Voltage (V):
     120 to 230VAC

  • Output
    Form:
     Line Voltage Output: SPNO; Isolated Alarm Output: SPDT

  • Trip Delay Type: Factory fixed ≅ 10s