455575 - 455 Series

Series: 455 Questions? Contact Littelfuse Support
Littelfuse Voltage Monitoring Relays
Roll Over to Zoom

The Model 455 is a 3-phase, dual-range voltage monitor that automatically selects between 200V and 400V range to protect 190V-480VAC, 50/60Hz motors. The user-selectable nominal voltage setpoint and can be adjustment 2-30 second trip delay. a 2-300 second restart delay or manual restart, and a voltage unbalance trip point between 2-8%. The monitor's electronics are powered through the line side without the need for a separate power source making it easier to install.

The 455 offers complete protection even before the motor starts by monitoring both the load and line side to detect impending power problems. Unlike other voltage monitors where voltage problems are detected only after the motor is started, the 455 will not allow the motor to start if a power problem is present.

Equipped with an infrared LED, the 455 can communicate to the optional hand-held diagnostic tool, Informer-MS to obtain valuable information such as real-time voltage, voltage unbalance on both line and load sides, motor run hours, last 20 faults, last 32 motor starts, high and low voltage trip points, voltage unbalance trip point, restart and trip delay settings, LED status and more.

Property (Mouseover for details) Value
Input Voltage (V) 475 to 600VAC
Maximum Input Power 6W
Input AC Line Frequency (Hz) 50/60Hz (50Hz will increase all delay timers by 20%.)
Output Form SPDT
Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC; General Purpose: 10A
Restart Delay Range Manual 2 - 300s adjustable
Repeat Accuracy (%) ±0.1%
Trip Delay Range Over Under and Unbalanced Voltage: 2 - 30s adjustable; Single-phasing faults (>25%UB): 2s fixed
Trip Point Accuracy (%) ±1%
Overvoltage Trip Voltage (%) 110%
Overvoltage Reset Voltage (%) 107%
Undervoltage Trip Voltage 90%
Undervoltage Reset Voltage (%) 93%
Voltage Unbalance Trip Point (%) 2 - 8% adjustable
Voltage Unbalance Reset (%) Trip setting minus 1%
Termination Type Torque: 7in-lbs; Wire Size: 12-18AWG
Mounting Method #8 screws
Operating Temperature -40° to 70°C (-40° to 158°F)
Storage Temperature (F/C) -40° to 80°C (-40° to 176°F)
Dimensions 2.93 in H x 5.27 in W x 2.95 in D (74.4 x 133.9 x 74.9 mm)
Weight (lbs/g) 1.1 lbs. (17.6 oz. 499.0 g)