TDUIL3001A - TDUI / TDUIH / TDUIL Series

Littelfuse Delay on Make Relays
Roll Over to Zoom
The TDU Series are encapsulated solid-state, delay-on-make timers that combine digital timing circuitry with universal voltage operation. The TDU offers DIP switch adjustment allowing accurate selection of the time delay over the full time delay range. This series is an excellent choice for process control systems and OEM equipment.


Operation (Delay-on-Make)
Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed.
Reset: Removing input voltage resets the time delay and output.

Property (Mouseover for details) Value
Input Voltage (V) 100 to 240VAC
Input Tolerance (%) ±20%
Input AC Line Frequency (Hz) 50/60Hz
Output Type Solid state
Output Form NO closed during timing
Output Load Rating (VA) 1A steady state 10A inrush at 60°C
Output Voltage Drop (V) ≅2.5V @ 1A
Time Delay Range 0.1 - 102.3s in 0.1s increments
Reset Time (ms) ≤150ms
Repeat Accuracy (%) ±0.5% or 20ms whichever is greater
Setting Accuracy ≤±2% or 50ms whichever is greater
Setpoint vs Ambient Temperature and Operating Voltage (%) ≤ ±5%
Open State Leakage Current (A) ≅5mA @ 240VAC
Insulation Resistance ≥100 MΩ
Dielectric Breakdown ≥2000V RMS terminals to mounting surface
Circuitry Encapsulated
Power Consumption ≤2VA
Termination Type 0.25 in. (6.35mm) male quick connect terminals
Mounting Method Surface mount with one #10 (M5 x 0.8) screw
Operating Temperature -40° t° 60°C (-40°F t° 140°F)
Storage Temperature (F/C) -40° to 85°C (-40°F to 185°F)
Humidity 95% relative non-condensing
Dimensions 2.00 x 2.00 x 1.21 in. (50.8 x 50.8 x 30.7mm)
Weight (lbs/g) ≅2.4oz (68g)
Sample capable No