24063-08 - Continuous-Duty SPST Series

Series: Continuous-Duty SPST
Questions? Contact Littelfuse Support
5.1.2
Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

The 24 V 65 A Continuous-Duty SPST Series Insulated Solenoid Relay (24063-08) is designed with a PVC-coated plated steel housing, single-pole, single-throw (SPST) circuitry, and normally open contacts.

This insulated solenoid features studs that are electrically isolated from the housing. The heavy-duty, durable contacts and the high contact force developed by the solenoid allow this relay to handle high current loads.

In addition, this model of the Continuous Duty SPST series solenoid relay has an intermittent rating of 120 A make, 65 A break at 10 seconds on, 30 minutes off, and it is UL and CE approved.

Features and Benefits

  • 65 A continuous current rating
  • 120 A make, 65 A break at 10 seconds on, 30 minutes off
  • 24 V coil and a coil impedance of 71 ohms
  • Insulated coil design electrically isolates the studs from the housing
  • SPST circuitry and normally open contacts
  • Plated steel housing with a PVC coating is sealed to an IP66 rating
  • Two large 5/16"-24 copper power studs and two small #10-32 steel coil studs (control circuit) are heavy and durable
  • Flat bracket
  • Included hex nuts and lock washers are assembled
  • UL & CE approved
Order Samples

Product Literature

Commercial Vehicle Relays Solenoids Selection Guide

Commercial Vehicle Solenoids FAQ


Property (Mouseover for details) Value
Current Rating (Continuous) in Amps 65
Circuitry SPST
Normal Position Normally Open
Contact Material Silver
Housing Black PVC Coated Plated Steel

Part # Part Description RoHS Pb-free RoHS (2015/ 863/EU) Certificate REACH (SVHC’s) Declaration Halogen Free REACH (SVHC’s) IPC-Material Declaration
24063-08 SOL 24V 71OHM CONT 4STUD HN12 #8 CH-MX RoHS No PbFree No
If the product environmental information that you are looking for does not appear in this tab,
please complete the Product Environmental Information Request Form.