Link has been copied to clipboard

A2106AA3L

Product Status| Obsoletei

A2106AA3L

| Series: AxxxxA_3

The three-chip modified TO-220 SIDACtor balanced solid state device is designed for telecommunication protection systems that reference Tip and Ring to earth ground. Applications include any piece of transmission equipment that requires balanced protection. This device is built using Littelfuse’s patented “Y” (US Patent 4,905,119) configuration.

The SIDACtor device is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20,K.21 and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68).

Property	Value
V_DRM T-R (V)	50
V_S T-R (V)	80
Pins Tip to Ring	1-3
C_O 2V T-R MAX (pF)	45
C_O 2V T-R MIN (pF)	10
Iscurr	800
I_DRM @ V_DRM (µA)	5
I_H (A)	120
di/dt @ 110°C (A/µs)	500
Regulatory Requirements	GR1089 Intra-Building GR1089 Inter-Building (Series Resistance Needed) ITU K.20 (Series Resistance Needed) ITU K.20 Enhanced (Series Resistance Needed) ITU K.21 Enhanced (Series Resistance Needed) TIA-968-A (Series Resistance Needed) YD/T 993-1998 Without Primary (Series Resistance Needed)
Ipp5x310	75
Ipp10x700	75
Ipp2x10	150
Ipp5x320	75
Ipp8x20	150
Pins Tip to Ground	1-2
Pins Ring to Ground	3-2
Circuit Diagram	Balanced-Y
Switching Voltage Ring to Ground	250
Type	SLIC Protection SIDACtor Device
Configuration	Single Port
On-State Voltage Vt	8
Switching Voltage Tip to Ground	250
Surge Rating	A
Peak Off-State Voltage Ring to Ground	170
Min Capacitance Ring to Ground pF	15
Max Capacitance Ring to Ground	35
Max Capacitance Tip to Ground	35
I_TSM 60Hz (A)	20
Circuit Name	Balanced-Y
Typical Capacitance Tip to Ring	15
Min Capacitance Tip to Ground	15
Peak Off-State Voltage Tip to Ground	170

All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
IPP is a repetitive surge rating and is guaranteed for the life of the product.
Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
V_drm is measured at I_drm.
V_s is measured at 100 V/μs.
Special voltage (V_s and V_drm) and holding current (I_h) requirements are available upon request.
Off-state capacitance is measured between pins 1-2 and 3-2 at 1 MHz with a 2 V bias
Device is designed to meet balance requirements of GTS 8700 and GR 974.

A2106AA3L Resources

Link has been copied to clipboard

Showing 1 to 1 of 1 Total Results

Part Number	Part Description	RoHS	Pb-Free	RoHS (2015/863/EU) Certificate	REACH (SVHCs) Declaration	REACH (SVHCs)	Halogen Free	IPC-Material Declaration
A2106AA3L									View More

If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.