Link has been copied to clipboard
A1220UB4
| Series: AxxxxUx4
This solid state SIDACtor® protection device is an integrated multichip solution for protecting multiple twisted pair from overvoltage conditions. Based on a six-pin surface mount SOIC package, it is equivalent to four discrete DO-214AA or two TO-220 packages. Available in surge current ratings up to 500A, the multiport line protector is ideal for densely populated line cards that cannot afford PCB inefficiencies or the use of series power resistors.
SIDACtor® devices are used to enable equipment to meet various regulatory requirements including GR1089, ITUK.20, K.21 and K.45, IEC60950, UL60950, and TIA/EIA-IS-968 (formerly known as FCCPart68).
Notes:
SIDACtor® devices are used to enable equipment to meet various regulatory requirements including GR1089, ITUK.20, K.21 and K.45, IEC60950, UL60950, and TIA/EIA-IS-968 (formerly known as FCCPart68).
Notes:
- All measurements are made at an ambient temperature of 2 °C. Ipp applies to -40 °C through +85°C temperature range.
- Ipp is a repetitive surge rating and is guaranteed for the life of the product.
- Listed SIDACtor® devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
- Vdrm is measured at Idrm.
- Vs is measured at 100V/µs
- Special voltage (Vs & Vdrm) and holding current (Ih) requirements are available upon request.
- Off-state capacitance is measured at 1MHz with a 2V bias and is a typical value.
| Property | Value |
|---|---|
VDRM T-R (V) | 280 |
VS T-R (V) | 350 |
Pins Tip to Ring | 3-1 6-4 |
CO 2V T-R MAX (pF) | 35 |
CO 2V T-R MIN (pF) | 10 |
Iscurr | 800 |
IDRM @ VDRM (µA) | 5 |
IH (A) | 120 |
di/dt @ 110°C (A/µs) | 500 |
Regulatory Requirements | GR1089 Intra-Building GR1089 Inter-Building (Series Resistance Needed) ITU K.20 ITU K.20 Enhanced ITU K.21 Enhanced TIA-968-A YD/T 993-1998 Without Primary YD/T 993-1998 With Primary (Series Resistance Needed) |
Pins Tip to Ground | 3-2 6-5 |
Pins Ring to Ground | 1-2 4-5 |
Circuit Diagram | Quad Chip |
Switching Voltage Ring to Ground | 220 |
Type | No |
Configuration | Dual Port |
On-State Voltage Vt | 4 |
Switching Voltage Tip to Ground | 130 |
Dye Type Rating | B |
Peak Off-State Voltage Ring to Ground | 180 |
Min Capacitance Ring to Ground pF | 30 |
Max Capacitance Ring to Ground | 110 |
Max Capacitance Tip to Ground | 110 |
ITSM 60Hz (A) | 30 |
Circuit Name | Quad Chip |
Min Capacitance Tip to Ground | 30 |
Peak Off-State Voltage Tip to Ground | 100 |
A1220UB4 Resources
Link has been copied to clipboardShowing 1 to 2 of 2 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| A1220UB4RP | View More | ||||||||
| A1220UB4TP | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.
