Link has been copied to clipboard
P0300ECMC
SIDACtor® Bi 25V 500A TO92 | Series: Pxxx0ECMC
The TO-92 MC SIDACtor series is intended for applications sensitive to load values. Typically, high speed connections require a lower capacitance. CO values for MC devices are 40% lower than a standard EC part.
This MC SIDACtor series is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68) without the need of series resistors.
Notes:
This MC SIDACtor series is used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68) without the need of series resistors.
Notes:
- All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
- IPP is a repetitive surge rating and is guaranteed for the life of the product.
- Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
- VDRM is measured at IDRM.
- VS is measured at 100 V/µs.
- Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
- Off-state capacitance is measured at 1MHz with a 2V bias.
| Property | Value |
|---|---|
VDRM T-R (V) | 25 |
VS T-R (V) | 40 |
Pins Tip to Ring | 1-2 |
CO 2V T-R MAX (pF) | 45 |
CO 2V T-R MIN (pF) | 25 |
Iscurr | 800 |
IDRM @ VDRM (µA) | 5 |
IH (A) | 50 |
di/dt @ 110°C (A/µs) | 500 |
Regulatory Requirements | GR1089 INTER BUILDING GR1089 INTRA-BUILDING ITU K.20 ITU K.20 ENHANCED ITU K.21 ENHANCED TIA-968-A YD/T 993-1998 WITH PRIMARY YD/T 993-1998 WITHOUT PRIMARY |
Ipp5x310 | 200 |
Ipp10x700 | 200 |
Ipp2x10 | 500 |
Ipp5x320 | 200 |
Ipp8x20 | 400 |
Package | TO-92 |
Circuit Diagram | Single Chip |
Type | Broadband Optimized SIDACtor Device |
Configuration | Single Device |
On-State Voltage Vt | 4 |
Surge Rating | C |
ITSM 60Hz (A) | 30 |
Circuit Name | Single Chip |
P0300ECMC Resources
Link has been copied to clipboardShowing 1 to 4 of 4 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHCs) Declaration | REACH (SVHCs) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| P0300ECMC | SIDACtor® Bi 25V 500A TO92 | No | No | Yes | View More | ||||
| P0300ECMCAP | SIDACtor® Bi 25V 500A TO92 | No | No | Yes | View More | ||||
| P0300ECMCRP1 | SIDACtor® Bi 25V 500A TO92 | No | No | Yes | View More | ||||
| P0300ECMCRP2 | SIDACtor® Bi 25V 500A TO92 | No | No | Yes | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.
