Link has been copied to clipboard
P1701CB2L
SIDACtor® Uni 160V 50A DO214 3L RoHS | Series: Pxxx1Cx2L
This fixed voltage, unidirectional, modified DO-214 SIDACtor thyristor series is designed to protect SLICs (Subscriber Line Interface Circuit) from damaging overvoltage transients.
These components provide single port protection implementing voltage switching characteristics for negative polarity surges and a clamping diode for positive polarity surges. All positive surges are routed through internal diodes to a ground reference.
Applicable Global Standards:
- TIA-968-A
- TIA-968-BITU K.20/21
- Enhanced Level*
- ITU K.20/21 Basic Level
- GR 1089 Inter-building*
- GR 1089 Intra-building
- IEC 61000-4-5 2nd edition
- YD/T 1082
- YD/T 993
- YD/T 950
* Series resistance required
| Property | Value |
|---|---|
VDRM T-R (V) | 160 |
VS T-R (V) | 200 |
Pins Tip to Ring | 1-3 |
CO 2V T-R MAX (pF) | 25 |
CO 2V T-R MIN (pF) | 15 |
Iscurr | 800 |
IDRM @ VDRM (µA) | 5 |
IH (A) | 120 |
di/dt @ 110°C (A/µs) | 500 |
Regulatory Requirements | GR1089 INTER-BUILDING (SERIES |
Ipp5x310 | 100 |
Ipp10x700 | 100 |
Ipp2x10 | 250 |
Ipp5x320 | 100 |
Ipp8x20 | 250 |
Pins Tip to Ground | 1-2 |
Pins Ring to Ground | 3-2 |
Vf (V) | 5 |
Package | Modified DO-214AA |
Circuit Diagram | Dual SLIC |
Switching Voltage Ring to Ground | 200 |
Type | SLIC Protection SIDACtor Device |
Configuration | Single Device |
On-State Voltage Vt | 4 |
Switching Voltage Tip to Ground | 200 |
Dye Type Rating | A |
Peak Off-State Voltage Ring to Ground | 160 |
Min Capacitance Ring to Ground pF | 25 |
Max Capacitance Ring to Ground | 40 |
Max Capacitance Tip to Ground | 40 |
ITSM 60Hz (A) | 30 |
Circuit Name | Dual SLIC |
Min Capacitance Tip to Ground | 25 |
Peak Off-State Voltage Tip to Ground | 160 |
- Low voltage overshoot
- Low on-state voltage
- Does not degrade surge capability after multiple surge events within limit
- Fails short circuit when surged in excess of ratings
- Integrated diodes for positive voltage surges
- Single-port protection
- RoHS Compliant and Halogen-free
- Pb-free E3 means 2nd level interconnect is
- Pb-free and the terminal finish material is tin(Sn)(IPC/JEDEC J-STD-609A.01)
P1701CB2L Resources
Link has been copied to clipboardShowing 1 to 1 of 1 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| P1701CB2LRP | SIDACtor® Uni 160V 50A DO214 3L RoHS | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.