Link has been copied to clipboard
P0641UC
SIDACtor® Uni SYM 4Chp 58V 500A MS013 | Series: pxxx1u_
This multiport line protector is designed as a single-package solution for protecting multiple twisted pair from overvoltage conditions. Based on a six-pin SOIC package, it is equivalent to four discrete DO-214AA packages.
Available in surge current ratings up to 500A for a 2x10µs event, the multiport line protector is ideal for densely populated line cards that cannot afford PCB inefficiencies or the use of series power resistors.
Notes:
Available in surge current ratings up to 500A for a 2x10µs event, the multiport line protector is ideal for densely populated line cards that cannot afford PCB inefficiencies or the use of series power resistors.
Notes:
- All measurements are made at an ambient temperature of 25°C. Ipp applies to -40°C through +85°C temperature range.
- Ipp is a repetitive surge rating and is guaranteed for the life of the product.
- Listed SIDACtor® devices are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities.
- Vdrm is measured at Idrm.
- Vs is measured at 100V/µs.
- Special voltage (Vs & Vdrm) and holding current (Ih) requirements are available upon request.
- Off-state capacitance is measured across pins 1-2, 2-3, 4-5, or 5-6 at 1 MHz with a 2V bias and is a typical value. Capacitance across pins 1-3 or 4-6 is approximately half. “UC” capacitance is approximately 2x the listed value for “UA” product.
- Parallel capacitive loads may affect electrical parameters.
| Property | Value |
|---|---|
VDRM T-R (V) | 58 |
VS T-R (V) | 77 |
Pins Tip to Ring | 3-1 6-4 |
CO 2V T-R MAX (pF) | 105 |
CO 2V T-R MIN (pF) | 20 |
Iscurr | 800 |
IDRM @ VDRM (µA) | 5 |
IH (A) | 120 |
di/dt @ 110°C (A/µs) | 500 |
Regulatory Requirements | GR1089 INTER BUILDING GR1089 INTRA-BUILDING ITU K.20 ITU K.20 ENHANCED ITU K.21 ENHANCED TIA-968-A YD/T 993-1998 WITH PRIMARY YD/T 993-1998 WITHOUT PRIMARY |
Ipp5x310 | 200 |
Ipp10x700 | 200 |
Ipp2x10 | 500 |
Ipp5x320 | 200 |
Ipp8x20 | 400 |
Pins Tip to Ground | 3-2 6-5 |
Pins Ring to Ground | 1-2 4-5 |
Vf (V) | 5 |
Surge Rating | C |
Package | MS-013 |
Circuit Diagram | Quad SLIC |
Switching Voltage Ring to Ground | 77 |
Type | SLIC Protection SIDACtor Device |
Configuration | Dual Port |
On-State Voltage Vt | 4 |
Switching Voltage Tip to Ground | 77 |
Peak Off-State Voltage Ring to Ground | 58 |
Min Capacitance Ring to Ground pF | 65 |
Max Capacitance Ring to Ground | 200 |
Max Capacitance Tip to Ground | 200 |
ITSM 60Hz (A) | 50 |
Circuit Name | Quad SLIC |
Min Capacitance Tip to Ground | 65 |
Peak Off-State Voltage Tip to Ground | 58 |
P0641UC Resources
Link has been copied to clipboardShowing 1 to 2 of 2 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| P0641UCRP | SIDACtor® Uni SYM 4Chp 58V 500A MS013 |  9/1/2004 | No | No | View More | ||||
| P0641UCTP | SIDACtor® Uni SYM 4Chp 58V 500A MS013 | 9/1/2004 | No | No | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.
