Link has been copied to clipboard
P2103UCL
SIDACtor® SYM 3Chp 170V 500A MS013 RoHS | Series: Pxxx3U
This balanced protector is a surface mount alternative to the modified TO-220 package. Based on a six-pin surface mount SOIC package, it uses Littelfuse's patented "Y" (US Patent 4,905,119) configuration. It is available in surge current ratings up to 500A.
SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).
Notes:
SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).
Notes:
- All measurements are made at an ambient temperature of 25°C. Ipp applies to -40°C through +85°C temperature range.
- Ipp is a repetitive surge rating and is guaranteed for the life of the product.
- Listed SIDACtor® devices are bi-directional. All electrical parameters & surge ratings apply to forward and reverse polarities.
- Vdrm is measured at Idrm.
- Vs is measured at 100 V/µs.
- Special voltage (Vs & Vdrm) and holding current (Ih) requirements are available upon request.
- Off-state capacitance is measured between Pins 1-3 and 1-4 at 1 MHz with a 2 V bias.
- Designed to meet balance requirements of GTS 8700 and GR 974.
| Property | Value |
|---|---|
VDRM T-R (V) | 170 |
VS T-R (V) | 250 |
Pins Tip to Ring | 3-4 |
CO 2V T-R MAX (pF) | 55 |
CO 2V T-R MIN (pF) | 15 |
Iscurr | 800 |
IDRM @ VDRM (µA) | 5 |
IH (mA) | 150 |
di/dt @ 110°C (A/µs) | 500 |
Regulatory Requirements | GR1089 INTER BUILDING GR1089 INTRA-BUILDING ITU K.20 ITU K.20 ENHANCED ITU K.21 ENHANCED TIA-968-A YD/T 993-1998 WITH PRIMARY YD/T 993-1998 WITHOUT PRIMARY |
Ipp5x310 | 200 |
Ipp10x700 | 200 |
Ipp2x10 | 500 |
Ipp5x320 | 200 |
Ipp8x20 | 400 |
Pins Tip to Ground | 3-1 3-6 |
Pins Ring to Ground | 4-1 4-6 |
Package | Modified MS-013 |
Circuit Diagram | Balanced-Y |
Switching Voltage Ring to Ground | 250 |
Type | SIDACTOR DEVICE |
Configuration | Single Port |
On-State Voltage Vt | 8 |
Switching Voltage Tip to Ground | 250 |
Dye Type Rating | C |
Peak Off-State Voltage Ring to Ground | 170 |
Min Capacitance Ring to Ground pF | 30 |
Max Capacitance Ring to Ground | 85 |
Max Capacitance Tip to Ground | 85 |
ITSM 60Hz (A) | 50 |
Circuit Name | Balanced-Y |
Min Capacitance Tip to Ground | 30 |
Peak Off-State Voltage Tip to Ground | 170 |
P2103UCL Resources
Link has been copied to clipboardShowing 1 to 2 of 2 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| P2103UCLRP | SIDACtor® SYM 3Chp 170V 500A MS013 RoHS |  9/1/2004 | No | No | View More | ||||
| P2103UCLTP | SIDACtor® SYM 3Chp 170V 500A MS013 RoHS | 9/1/2004 | No | No | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.
