Link has been copied to clipboard
P1556UC
SIDACtor® SYM 6Chp 130V 500A MS013 | Series: Pxxx6U
This multiport balanced protector is a surface mount alternative to the modified TO-220 package. It is based on a six-pin surface mount SOIC package and uses Littelfuse's patented "Y" (US Patent 4,905,119) configuration. It is available in surge current ratings up to 500A.
SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).
Notes:
SIDACtor devices are used to enable equipment to meet various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968 (formerly known as FCC Part 68).
Notes:
- All measurements are made at an ambient temperature of 25°C. IPP applies to -40°C through +85°C temperature range.
- IPP is a repetitive surge rating and is guaranteed for the life of the product.
- Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
- VDRM is measured at IDRM.
- VS is measured at 100 V/µs.
- Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
- Off-state capacitance is measured between Pins 1-2 and 3-2 at 1 MHz with a 2 V bias and is a typical value for "UA" product. "UB" and "UC" capacitance is approximately 10 pF higher.
- Device is designed to meet balance requirements of GTS 8700 and GR 974.
| Property | Value |
|---|---|
VDRM T-R (V) | 130 |
VS T-R (V) | 180 |
Pins Tip to Ring | 3-1 6-4 |
CO 2V T-R MAX (pF) | 35 |
CO 2V T-R MIN (pF) | 20 |
Iscurr | 800 |
IDRM @ VDRM (µA) | 5 |
IH (A) | 150 |
di/dt @ 110°C (A/µs) | 500 |
Regulatory Requirements | GR1089 INTER BUILDING GR1089 INTRA-BUILDING ITU K.20 ITU K.20 ENHANCED ITU K.21 ENHANCED TIA-968-A YD/T 993-1998 WITH PRIMARY YD/T 993-1998 WITHOUT PRIMARY |
Ipp5x310 | 200 |
Ipp10x700 | 200 |
Ipp2x10 | 500 |
Ipp5x320 | 200 |
Ipp8x20 | 400 |
Pins Tip to Ground | 3-2 6-5 |
Pins Ring to Ground | 1-2 4-5 |
Package | MS-013 |
Circuit Diagram | Dual Balanced Y |
Switching Voltage Ring to Ground | 180 |
Type | SIDACTOR DEVICE |
Configuration | Dual Port |
On-State Voltage Vt | 8 |
Switching Voltage Tip to Ground | 180 |
Dye Type Rating | C |
Peak Off-State Voltage Ring to Ground | 130 |
Min Capacitance Ring to Ground pF | 30 |
Max Capacitance Ring to Ground | 55 |
Max Capacitance Tip to Ground | 55 |
ITSM 60Hz (A) | 50 |
Circuit Name | Dual Balanced Y |
Min Capacitance Tip to Ground | 30 |
Peak Off-State Voltage Tip to Ground | 130 |
P1556UC Resources
Link has been copied to clipboardShowing 1 to 2 of 2 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| P1556UCRP | SIDACtor® SYM 6Chp 130V 500A MS013 |  9/1/2004 | No | No | View More | ||||
| P1556UCTP | SIDACtor® SYM 6Chp 130V 500A MS013 | 9/1/2004 | No | No | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.
