Link has been copied to clipboard
P2702CB
SIDACtor® Bi 120/240V 100A DO214 3L | Series: pxxx2c_
The modified DO-214AA SIDACtor devices provide low-cost, longitudinal protection.
SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68).
SIDACtor devices enable equipment to comply with various regulatory requirements including GR 1089, ITU K.20, K.21, and K.45, IEC 60950, UL 60950, and TIA-968-A (formerly known as FCC Part 68).
Notes:
- All measurements are made at an ambient temperature of 25 °C. IPP applies to -40 °C through +85 °C temperature range.
- IPP is a repetitive surge rating and is guaranteed for the life of the product.
- Listed SIDACtor devices are bi-directional. All electrical parameters and surge ratings apply to forward and reverse polarities.
- VDRM is measured at IDRM.
- VS is measured at 100 V/μs.
- Special voltage (VS and VDRM) and holding current (IH) requirements are available upon request.
- UL 60950 creepage requirements must be considered.
| Property | Value |
|---|---|
VDRM T-R (V) | 240 |
VS T-R (V) | 320 |
Pins Tip to Ring | 1-3 |
CO 2V T-R MAX (pF) | 25 |
CO 2V T-R MIN (pF) | 10 |
Iscurr | 800 |
IDRM @ VDRM (µA) | 5 |
IH (mA) | 150 |
di/dt @ 110°C (A/µs) | 500 |
Regulatory Requirements | GR1089 INTER-BUILDING (SERIES GR1089 INTRA-BUILDING ITU K.20 ITU K.20 ENHANCED ITU K.21 ENHANCED TIA-968-A YD/T 993-1998 WITH PRIMARY (SE YD/T 993-1998 WITHOUT PRIMARY |
Ipp5x310 | 100 |
Ipp10x700 | 100 |
Ipp2x10 | 250 |
Ipp5x320 | 100 |
Ipp8x20 | 250 |
Pins Tip to Ground | 1-2 |
Pins Ring to Ground | 3-2 |
Circuit Diagram | Two Chip |
Switching Voltage Ring to Ground | 160 |
Type | SIDACTOR DEVICE |
Configuration | Single Port |
On-State Voltage Vt | 4 |
Switching Voltage Tip to Ground | 160 |
Dye Type Rating | B |
Peak Off-State Voltage Ring to Ground | 120 |
Min Capacitance Ring to Ground pF | 25 |
Max Capacitance Ring to Ground | 45 |
Max Capacitance Tip to Ground | 45 |
ITSM 60Hz (A) | 30 |
Circuit Name | Two Chip |
Min Capacitance Tip to Ground | 25 |
Peak Off-State Voltage Tip to Ground | 120 |
P2702CB Resources
Link has been copied to clipboardShowing 1 to 2 of 2 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| P2702CB | SIDACtor® Bi 120/240V 100A DO214 3L | View More | |||||||
| P2702CBRP | SIDACtor® Bi 120/240V 100A DO214 3L |  9/1/2004 | No | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.
