Link has been copied to clipboard
SP723AP
6 CH DIODE ARRAY PDIP8 | Series: SP723
The SP723 is an array of SCR/Diode bipolar structures for ESD and over-voltage protection of sensitive input circuits. The SP723 has 2 protection SCR/Diode device structures per input. There are a total of 6 available inputs that can be used to protect up to 6 external signal or bus lines. Over-voltage protection is from the IN (Pins 1 - 3 and Pins 5 - 7) to V+ or V-.
The SCR structures are designed for fast triggering at a threshold of one +VBE diode threshold above V+ (Pin 8) or a -VBE diode threshold below V- (Pin 4). From an IN input, a clamp to V+ is activated if a transient pulse causes the input to be increased to a voltage level greater than one VBE above V+. A similar clamp to V- is activated if a negative pulse, one VBE less than V-, is applied to an IN input.
| Property | Value |
|---|---|
AEC-Q101 Qualified | No |
VR (Vstandoff) | 30 |
ILeak (µA) | 0.02 |
ESD Contact (kV) | 8 |
ESD Air (kV) | 15 |
Lightning Immunity (8x20µs)(A) | 7 |
CI/O TYP (pF) | 5 |
Polarity | Bidirectional |
Channels | 6 |
Package | PDIP-8L |
- ESD Interface per HBM Standards
- IEC 61000-4-2, Direct Discharge 8 kV (Level 4)
- IEC 61000-4-2, Air Discharge 15 kV (Level 4)
- MIL-STD-3015.7 25 kV
- Peak Current Capability
- IEC 61000-4-5 8/20µs Peak Pulse Current ±7 A
- Single Transient Pulse, 100s Pulse Width ±4 A
- Designed to Provide Over-Voltage Protection
- Single-Ended Voltage Range to +30V
- Differential Voltage Range to ±15 V
SP723AP Applications
- Microprocessor/Logic Input Protection
- Data Bus Protection
- Analog Device Input Protection
- Voltage Clamp
SP723AP Resources
Link has been copied to clipboardShowing 1 to 1 of 1 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHCs) Declaration | REACH (SVHCs) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| SP723AP | 6 CH DIODE ARRAY PDIP8 | No | No | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.