background-waves

IX4340NE

Product Status| Activei

IX4340NE

DUAL LOW-SD NON-INVRTNG DRVR 5A EXP PAD | Series: AEC-Q100 Qualified Low-Side Drivers
info

The IX4340NE is an automotive grade, AEC-Q100 qualified dual, high current, low side gate driver. Each of the two outputs is capable of sourcing and sinking 5A of peak current, and has a maximum voltage rating of 20V. The two outputs can be paralleled for higher current applications. Fast propagation delay times (16ns typical) and fast rise and fall times (7ns) make the IX4340NE well suited for high frequency applications.

The inputs are TTL and CMOS logic compatible, and there is an independent Enable function for each output. Under voltage lockout circuitry (UVLO) prevents the high side source driver from conducting until there is sufficient supply voltage. The outputs are held low if the logic inputs are floating.

These devices, offered in a thermally enhanced 8-pin SOIC package with an exposed metal back, are fully qualified for automotive use per requirements of AEC-Q100.

PropertyValue
Peak Drive Current
5
Output Resistance Source / Sink (Ω)
1.5 / 1.1
Logic Configurations
D
Enable Function
Yes
Under Voltage Lockout Maximum Threshold (V)
3.8
IC Package Type
8-pin SOIC-EP
Output Type
DUAL
  • AEC-Q100 Qualified
  • Dual Drivers Source/Sink 5 A Drive Current
  • Operating Voltage Range: 5 V to 20 V
  • AEC-Q100 Grade 1: -40°C to +125°C Operating Temperature Range
  • AEC-Q100 Classification 3 A ±4 kV ESD Rating (Human Body Model
  • Independent Enable for each driver
  • Undervoltage Lockout Circuitry
  • Fast Rise and Fall Times (7ns typical)
  • Fast Propagation Delays (16ns typical)

IX4340NE Resources

Showing 1 to 2 of 2 Total Results
Share
Part NumberPart DescriptionRoHSPb-FreeRoHS (2015/863/EU) CertificateREACH (SVHC's) DeclarationREACH (SVHC's)Halogen FreeIPC-Material Declaration
IX4340NEDUAL LOW-SD NON-INVRTNG DRVR 5A EXP PAD
IX4340NETRDUAL LOW-SD NON-INVRTNG DRVR 5A EXP PAD

If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.