EL731-20-10 - EL731 Series

Series: EL731
Questions? Contact Littelfuse Support
External overview image
Roll Over to Zoom
Disclaimer Notice

Littelfuse products are not designed for, and shall not be used for, any purpose (including, without limitation, automotive, military, aerospace, medical, life-saving, life-sustaining or nuclear facility applications, devices intended for surgical implant into the body, or any other application in which the failure or lack of desired operation of the product may result in personal injury, death, or property damage) other than those expressly set forth in applicable Littelfuse product documentation. Warranties granted by Littelfuse shall be deemed void for products used for any purpose not expressly set forth in applicable Littelfuse documentation. Littelfuse shall not be liable for any claims or damages arising out of products used in applications not expressly intended by Littelfuse as set forth in applicable Littelfuse documentation. The sale and use of Littelfuse products is subject to Littelfuse Terms and Conditions of Sale, unless otherwise agreed by Littelfuse. "Littelfuse" includes Littelfuse, Inc., and all of its affiliate entities.

Operates on AC resistance grounded systems and DC grounded systems.
The EL731 is a microprocessor-based AC/DC Sensitive Earth-Leakage Relay that offers complete coverage for all frequencies from 0-6,000 Hz. Two CT’s are required for the entire frequency range, or one CT can be used for only low-or high-frequency detection. An RTD/PTC sensor input allows over-temperature protection. The EL731 offers metering capabilities, password-protected alarm and trip settings and optional network communications. It is used to add low-level ground-fault protection to variable-speed drives, and to dc currents.

COMPUTER TO RELAY CONNECTION

Connect the EL731 to the network using a standard Ethernet patch cable. Use of a crossover cable to connect the EL731 directly to the computer running IP-Config is not recommended. A typical router will assign an IP address to all connected computers that are using DHCP. The EL731 does not support the use of DHCP. If the EL731 is being set-up for first time, it is recommended to only have one EL731 connected to the network to prevent communication errors.

Click here to download the COMPUTER TO RELAY CONNECTION Diagram.

Property (Mouseover for details) Value
Relay Contacts Config 3 Form C (N.O./N.C.)
Supply Voltage dc 24
IEEE Device Numbers 38 - 49 - 50G - 50N - 51G - 51N - 79G
Relay Contacts Operation Fail-safe / Non Fail-safe
Dimensions 1.9 H x 3.8 W x 5 D in.
Weight (lbs/g) 0 Kg
Auto Manual Reset Latching trip - Non-latching alarm
Conformally coated Standard
Frequency 0 - 6000
GF Trip Level A 0.03 - 5.00
GF Trip Time s 0.05 - 2.00
Harmonic Filtering Standard
Mount Method DIN (optional) - Panel - Surface (optional)
Reset Type Front-panel switch/Remote N.O. Contact
System type Solidly Grounded AC - Solidly Grounded DC - Resistance rounded AC
Temp Sensor Config Single PTC/RTD
Check Stock Yes
To request product environmental information, please complete the Product Environmental Information Request Form.