ISS-102C-M-LC - ISS-102 Series

Series: ISS-102
Questions? Contact Littelfuse Support
Roll Over to Zoom
The ISS-102 is a two-channel, intrinsically-safe switch designed for multiple uses including a pump-up/pump-down (latching) controller or two-channel switch. Two LEDs indicate the state of the intrinsically-safe inputs and output relays and user-selectable options are available including a variable resistance threshold for float inputs. The ISS-102 enclosure is surface or DIN rail mountable.
-LC Each input channel is active when the corresponding switch is closed. When the lag input (CH2) is activated, the output closes. Applying latching logic, the output contact remains closed until the lead (CH1) and the lag (CH2) inputs are deactivated. Sensitivity is fixed at 100kOhms with a debounce time delay of 2 seconds.
-DCS This dual-channel switch has a debounce delay feature of 0.5 seconds. Resistance probes or switches can be used on its inputs. Two LEDs illuminate the output state of either form A relay. Sensitivity is fixed at 100kOhms with a debounce time delay of 0.5 seconds.
-MC By selecting the proper functionality through the dip switches, you can define a pump-up or pump-down, single or dual channel non-latching switch. The sensitivity adjustment (4.7k-100kOhms) allows you to define the input impedance at which the output relays (one form A & one form C) will change state, with a debounce time delay of 0.5 or 2 seconds.
Property (Mouseover for details) Value
Input Voltage (V) 120VAC nominal
Maximum Input Power 2W
Input AC Line Frequency (Hz) 50/60Hz
Output Form One Form C
Output Load Rating (VA) Pilot Duty: 180VA @ 120VAC C150; General Purpose: 5A @ 120VAC
Debounce Time Delay (s) 0.5 or 2s
Sensor Mode Differential / Latching; 1-channel or 2-channel switch
Sense Voltage 5vdc pulsed (probe)
Sensitivity (Ohms) 100kΩ
Intrinsically Safe Circuit Location Division 1 and 2; Class I Groups A B C D; Class II Groups E F G; Class III
Indication Output relay status indicators
Life Electrical: 100 000 cycles min. @ rated load; Mechanical: 10 000 000 cycles
Termination Type Torque: 3.5 to 4.5 in-lbs (max. 4.5 in.-lbs); Wire: 12-20AWG; Depluggable Phoenix Contact - Series MSTB plugs (or equivalent)
Mounting Method 35mm DIN rail or Surface Mount (#6 or #8 screws)
Operating Temperature -20° to 55°C (-4° to 131°F)
Dimensions 3.50 in H x 2.08 in W x 2.35 in D (88.9 x 52.9 x 59.7 mm)
Weight (lbs/g) 0.7 lb. (11.2 oz. 317.5 g)
To request product environmental information, please complete the Product Environmental Information Request Form.