MP8000 - MP8000 Series

Litteluse MP8000 Bluetooth Enabled Relay
Roll Over to Zoom
Litteluse MP8000 Bluetooth Enabled Relay   Littelfuse MP8000 Smart Phone App  

The MP8000 is an advanced motor protection electronic overload relay that is fully programmable via Bluetooth* using an iPhone* or Android* smartphone or tablet with the Littelfuse App. It is easy to use and arc-flash safety is increased because the app allows settings to be modified and real-time operational information viewed. Viewing operational information and faults on the app does not require the user to open the control panel. The MP8000 protects any motor drawing 0.5-1,000 full load Amps (external CTs are required above 100 Amperes). It is designed for single or 3-phase systems with operating voltages of 90-690 VAC (use of external potential transformers can extend upper voltage range above 690 VAC). Common applications include conveyor systems, HVAC equipment, saws and grinders, fan motors, and almost any pumping application.

Protection is unsurpassed by combining overload, voltage, phase loss and reversal, voltage and current imbalance, power monitoring, and underload in one package. For standalone applications, the Bluetooth* interface can be used when paired with a smartphone or tablet. The units also feature an Ethernet communications port that can be used to form an Ethernet Modbus TCP/IP or Ethernet/IP network. Units can be remotely monitored and controlled from a PC, or SCADA system, and data logging through a PC with the optional MP8000 software or other software program using the MP8000 memory map. This capability allows for a simple cost-effective way to further enhance arc-flash safety.

*Bluetooth, iPhone and Android are registered trademarks of their respective owners.

Property (Mouseover for details) Value
Approvals cULus, CE, RCM
Supply Voltage (VAC) 85 - 264VAC
Input Voltage (V) 90 to 690VAC (use of external PTs can extend the upper range above 690VAC)
Input AC Line Frequency (Hz) 50/60Hz
Output Form Control relay: SPST - Form A; Auxilliary relay: SPDT - Form C
Output Load Rating (VA) Pilot Duty: 480VA @ 240VAC B300; General Purpose: 5A @ 240VAC
Full Load Amp Range (A) 0.5 - 100A direct; 100A+ using external CTs
Timing Accuracy (%) 2% ±0.5s
Repeat Accuracy (%) Voltage: ±0.5% of nominal voltage; Current: ±1% (2 to 100 amps direct)
Voltage Accuracy (%) ±1% of setting ±2Vrms
Overcurrent Trip Class 02 - 60 or linear
Current Accuracy (%) ±2% (2 to 100 amps direct)
Ground Fault Accuracy (%) ±2%
Sensor Hole Size Max conductor size: 0.63 in (with insulation)
HP/kW Accuracy (%) ±5% of setting ±5W
Indication Status: Green; Error: Red; Bluetooth connection: Blue
Short Circuit (kA) 100kA symmetrical at 690VAC
Surge Protection IEC: 61000-4-5 Level 3 2kV line-to-line; Level 4 4kV line-to-ground
Protection Class IP20
Pollution Degree 3 (conformal coating standard)
Circuitry Printed circuit board is conformal coated to resist moisture and corrosion
Memory Capacity Stores last 1 000 faults with time and date stamp includes conditions at time of trip
Communications Protocol Ethernet Modbus TCP/IP or Ethernet/IP
Communications Interface Bluetooth, Ethernet Modbus TCP/IP or Ethernet/IP
Communications Range Bluetooth range is up to 30 ft (range may be reduced depending on the smartphone/tablet used, enclosure type or environmental factors)
Termination Type Torque: Depluggable terminal blocks: 7in-lbs; Earth ground: 7.9 in-lbs
Mounting Method Surface mount (4 - #8 screws) on DIN rail mount
Operating Temperature -40° to 70°C (-40° to 158°F)
Storage Temperature (F/C) -40° to 85°C (-40° to 185°F)
Humidity 10-95% non-condensing per IEC 68-2-3
Dimensions 2.91 in. H x 4.08 in. W x 4.79 in. D (73.9 x 103.6 x 121.7 mm)
Weight (lbs/g) 0.85 lbs (13.6 oz 385.6 g)