601 CS D P1 Series - 3-Phase Power Monitor

External overview image
Roll Over to Zoom
The 601-CS-D-P1 3-phase power monitor is a fully programmable electronic power monitor designed to monitor 3-phase systems. The 601-CS-D-P1 has a single relay that can be configured as a general purpose network output or to trip on ground faults. The 601-CS-D-P1 monitors ground fault current, phase currents, phase voltages, power factor and frequency. The RS485MS-2W communications module allows the 601-CS-D-P1 to communicate using the Modbus RTU protocol. The Modbus connection can be used to monitor power parameters, setup the device or control the fault relay. A DeviceNet™ communications I/O module (CIO-601CS-DN-P1) is available as well. This CIO module only works with the 601-CS-D-P1 unit. It is used for sending the information from the 601-CS-D-P1 over a DeviceNet™ network. It also provides I/O capabilities and the ability to set the parameters of the 601-CS-D-P1.

Access specifications, certifications, check availability and order parts below

Catalog #Input
Voltage (V)
Termination TypeMounting MethodFull Load Amp Range (A)DimensionsWeight (lbs/g)Communications ProtocolCurrent Accuracy (%)Ground Fault Accuracy (%)HumidityInput AC Line Frequency (Hz)Maximum Input PowerOutput Load Rating (VA)Pollution DegreeStock
601-CS-D-P1200 - 480 VacSPDTTorque: 7 in-lbsSurface mount (4 - #8 screws) or DIN rail mount0.5 - 175 (direct); 176 - 800 (external CTs required)3.05 H x 3.85 W x 5.05 D in. (77.5 x 97.8 x 128.3 mm)0 KgModbus RTU±3% (<100 A direct)±3%10 - 95% non-condensing per IEC 68-2-350 / 6010Pilot Duty: 480 VA @ 240 Vac; General Purpose: 10 A @ 240 Vac3Check
To request product environmental information, please complete the Product Environmental Information Request Form.