background-waves

FS224

Product Status| Activei

FS224

DC FLASHER | Series: FS200
info
The FS200 Series may be used to control inductive, incandescent, or resistive loads. Input voltages of 12, 24, 36, 48, or 110VDC are available. Factory fixed flash rate of 90 FPM or may be ordered with a fixed custom flash rate ranging from 10 to 180 FPM. Encapsulation provides protection against shock, vibration, and humidity. Uniform performance, high inrush current capability, and low RFI, make this series ideal for general industrial applications.


Operation
Upon application of input voltage, the T2 OFF time begins. At the end of the OFF time, the T1 ON time begins and the load energizes. At the end of T1, T2 begins and the load de-energizes. This cycle repeats until input voltage is removed.
Reset: Removing input voltage resets the output and the sequence to T2.

PropertyValue
Input Voltage (V)
24 V dc
Output Load Rating (VA)
3 A maximum load rating steady state
Flash Rate (fpm)
90 ±10%
Dimensions
2 H x 2 W in. (50.8 x 50.8 mm)
Circuitry
Encapsulated
Input Tolerance (%)
±20%
Inrush
10 times steady state current
Mounting Method
Surface mount with one #10 (M5 x 0.8) screw
OFF Open State Leakage Current
≤250
On Off Ratio
≌50%
Operating Temperature Max (°C)
60
Operating Temperature Maximum Fahrenheit
140
Operating Temperature Min (°C)
-20
Operating Temperature Minimum Fahrenheit
-4
Output Load Type
Inductive resistive or incandescent
Storage Temperature Maximum Celsius
85
Storage Temperature Maximum Fahrenheit
185
Storage Temperature Minimum Celsius
-40
Storage Temperature Minimum Fahrenheit
-40
Termination Type
0.25 in. (6.35 mm) male quick connect terminals

FS224 Resources

Showing 1 to 1 of 1 Total Results
Share
Part NumberPart DescriptionRoHSPb-FreeRoHS (2015/863/EU) CertificateREACH (SVHCs) DeclarationREACH (SVHCs)Halogen FreeIPC-Material Declaration
FS224DC FLASHER

If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.