Link has been copied to clipboard
TSD1321
DIGI-TIMER (D.O.M.) | Series: TSD DOM Timers
The TSD1 Series is designed for more demanding commercial and industrial applications where small size and accurate performance is required. The factory calibration for fixed time delays is within 1% of the target time delay. The repeat accuracy, under stable conditions, is 0.1% of the time delay. The TSD1 Series is rated to operate over an extended temperature range. Time delays of 0.1 seconds to 100 hours are available. The output is rated 1A steady and 10A inrush. The modules are totally solid state and encapsulated to protect the electronic circuitry.
Operation (Delay-on-Make)
Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed.
Reset: Removing input voltage resets the time delay and output.
| Property | Value |
|---|---|
Input Voltage (V) | 24 V dc |
Output Form | NO - open during timing |
Time Delay Range (s) | 1 - 100 s externally adjustable |
Dimensions | 2 H x 2 W in. (50.8 x 50.8 mm) |
Circuitry | Encapsulated |
Dielectric Breakdown | ≥2000V terminals to mounting surface |
Humidity | 95% relative : non-condensing |
Input Tolerance (%) | ≌±20% |
Insulation Resistance (Ω) | ≥100 |
Mounting Method | Surface mount with 1 #10 (M5 x 0.8) screw |
OFF Open State Leakage Current | ≅5 @230 V ac |
Operating Temperature Max (°C) | 75 |
Operating Temperature Maximum Fahrenheit | 167 |
Operating Temperature Minimum Celsius | -40 |
Operating Temperature Minimum Fahrenheit | -40 |
Output Load Rating (VA) | 1 A steady state; 10 A inrush @ 60°C |
Minimum Output Holding Current (mA) | ≤40 |
Output Type | Solid state |
Output Voltage Drop (V) | ≅2.5 V @ 1 A |
Polarity | DC units are reverse polarity protected |
Recycle Time | ≤150 |
Repeat Accuracy (%) | ±0.1% or 20 ms whichever is greater |
Setpoint vs. Ambient Temperature and Operating Voltage | ≤±1% |
Storage Temperature Maximum Celsius | 85 |
Storage Temperature Maximum Fahrenheit | 185 |
Storage Temperature Minimum Celsius | -40 |
Storage Temperature Minimum Fahrenheit | -40 |
Termination Type | 0.25 in. (6.35 mm) male quick connect terminals |
Time Delay Tolerance (%) | ≤±1% |
TSD1321 Resources
Link has been copied to clipboardShowing 1 to 1 of 1 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| TSD1321 | DIGI-TIMER (D.O.M.) | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.