background-waves

PRS65

Product Status| Activei

PRS65

TIME DELAY RELAY (SINGLE SHOT) | Series: PRS
info

The PRS Series is a single shot time delay relay for use on non-critical timing applications. The knob adjustable time delay carries a guaranteed time range of up to 8 minutes.

Operation
Power must be applied to the input at all times prior to and during timing. Upon closure of the initiate switch (momentary or maintained) the output contacts transfer and the time delay is initiated. At the end of the delay interval, the output contacts revert to their original position. If the initiate switch is reclosed during timing, the time delay will not be affected.
PropertyValue
Input Voltage (V)
230 V ac
Output Form
SPDT
Time Delay Range (s)
7 - 480 s
Dielectric Breakdown
≥1500V @ 60 Hz between input and output terminals
Input AC Line Frequency (Hz)
50/60
Input Tolerance (%)
±15% of nominal
Isolation Voltage
±1500 V for 150 microseconds
Mounting Method
Plug-in socket
Operating Temperature Max (°C)
65
Operating Temperature Maximum Fahrenheit
149
Operating Temperature Min (°C)
-20
Operating Temperature Minimum Fahrenheit
-4
Output Load Rating (VA)
10 A resistive @ 240 V ac
Output Type
Relay
Recycle Time
After timing: ≤16; During timing: 0.1% of max. time delay or 75 whichever is greater
Repeat Accuracy (%)
±2% under fixed conditions
Reset Time (ms)
≤80
Setpoint vs. Ambient Temperature and Operating Voltage
≤±15%
Termination Type
Octal 8-pin plug-in
Time Delay Tolerance (%)
Guaranteed range
Time Delay Type
Knob adjustable

PRS65 Resources

Showing 1 to 1 of 1 Total Results
Share
Part NumberPart DescriptionRoHSPb-FreeRoHS (2015/863/EU) CertificateREACH (SVHCs) DeclarationREACH (SVHCs)Halogen FreeIPC-Material Declaration
PRS65TIME DELAY RELAY (SINGLE SHOT)

If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.