Series: 601

The 601 series is a fully-programmable voltage monitor designed to protect three-phase motors from loss of any phase (single-phasing), phase reversal, low- or high-voltage, voltage unbalance, low- or high-frequency, and rapid cycling. When a harmful condition is detected, the 601’s output relay is deactivated after the specified trip delay. The output relay reactivates after power line conditions return to an acceptable level for the programmed restart delay (RD2). This monitor can be used as a stand-alone product or networked with an RM-1000, RM-2000, PLC, computer, or SCADA system.

Eleven setpoints are viewable with the three-digit LED display or from a networked device:

• low voltage
• high voltage
• voltage unbalance
• low frequency
• high frequency
• RS485 address
• trip delay for voltage/frequency faults
• trip delay for single-phase faults
• rapid-cycle timer (RD1)
• restart delay after all faults (RD2)
• type of restart after all faults (manual or automatic)

Six parameters are viewable while the motor is running:

• L1-L2 voltage
• L2-L3 voltage
• L1-L3 voltage
• average voltage
• voltage unbalance (%)
• frequency

When used with the RS485MS-2W communications module, the 601 can communicate with most Modbus RTU master devices. Voltage conditions can be monitored and setpoints can be changed remotely using Solutions software, an RM1000, RM2000, or other device.