Littelfuse-Commercial Vehicle Catalog
Find electronic components for trucks, buses, and construction, agricultural, marine, material handling, recreational, and marine vehicles.
Link has been copied to clipboard
48740
SMART ISOLATOR CONTROLLER DUAL VOLTAGE | Series: FlexMod Battery Isolator ControllerThe FlexMod Smart Battery Isolator Controller unit monitors two battery banks and controls one or more relays or contactors to make sure starting power is protected by isolating the starting and auxiliary battery banks. Turns any electromecanical solenoid or relay into a battery isolator and works with ECM controlled alternators. System will disconnect load after 1 sec of excessive current, and auto-recover after 10 seconds.
Programmable unit can be setup with custom parameters by select authorized distributors.
Mounting: Four 9/32" (7.2mm) dia. holes
Size: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)
Programmable unit can be setup with custom parameters by select authorized distributors.
Mounting: Four 9/32" (7.2mm) dia. holes
Size: 4.0 x 2.7 x 1.3" (102 x 69 x 33mm)
| Property | Value |
|---|---|
Current Rating (Continuous) in Amps | 10 |
Ingress Protection | IP67 |
Housing | Blue Thermoplastic |
Humidity | 0 to 90% RH |
Agency Approval - Shock | SAE J1455 |
Agency Approval - Vibration | 10-500 Hz |
Connector | 8-pin Sealed Deutsch type |
Load dump | + 150 V |
Mounting Hole Dimensions (in) | 4 x 2.7 x 1.31 |
Overcurrent protection | Programmable Attribute |
Temperature Minimum (°C) | 85 |
Temperature Maximum (°F) | 185 |
Temperature Minimum Celsius | -40 |
Temperature Minimum (°F) | -40 |
Voltage Transient | +/- 600 |
- Compact (4x 3x1”) unit is IP67-rated for waterproofing, dustproofing and vibration-proofing, and it can mount anywhere on a vehicle
- Isolates main and auxiliary batteries when voltage drops below 12.7 V dc and automatically reconnects batteries at 13.2 V dc
- Start assist feature provides boost to starting battery
- Compatible with electronically controlled alternators Smart Battery Isolator Controller eliminates false battery warnings created by diode isolators.
- Preserves starting power; limiting downtime and jumpstarts due to dead batteries
- Status light output drives remote light, informing operator when banks are connected
- Unit is autoranging, sensing and operating in 12 V or 24 V systems
48740 Resources
Link has been copied to clipboardShowing 1 to 1 of 1 Total Results
Share
| Part Number | Part Description | RoHS | Pb-Free | RoHS (2015/863/EU) Certificate | REACH (SVHC's) Declaration | REACH (SVHC's) | Halogen Free | IPC-Material Declaration | |
|---|---|---|---|---|---|---|---|---|---|
| 48740 | SMART ISOLATOR CONTROLLER DUAL VOLTAGE | View More |
If the product environmental information that you are looking for does not appear in this tab, please complete the Product Environmental Information Request Form.
