00713200 - Mechanical Plunger Switches Series

Roll Over to Zoom

The mechanical switches signal many different situations that may occur on commercial vehiches: differential block, low gears brake failure, reduced gears, handbrake failure, etc. Mechanical switches work both with 12V and with 24V; available are versions with contacts normally open or contacts normally closed, and black seal connector IP 67/CEI EN 60529.

  • All the mechanical switches work both with 12V and with 24V
  • Black seal connector IP 67/CEI EN 60529.
  • Some versions are suitable for use under pressure conditions
  • Silver plated contacts
  • The superseal connector is protected with a rubber cap to prevent dirt intrusion before mounting
  • Maximum life of 125,000 cycles at 3W Ohmic Load
  • Working temperature range: -40 to +100°C
  • Vibration levels are 10G with frequency 10 to 500Hz
Property (Mouseover for details) Value
Voltage 12V
Load (Watt) 2x 21 Watt Lamp
Normally Open/Normally Closed NC
Contact Material Silver
Body_Material Steel
Connector Superseal
Hex Size 22
To request product environmental information, please complete the Product Environmental Information Request Form.