HE3300 Series - Reed Relay in Single-In-Line (SIL) Package

HE3300 Series Image
Miniature reed relay in a single-in-line (SIL) package with a choice of normally open, normally open high-voltage or changeover contacts capable of switching up to 300Vdc at 10W. Available with 5V, 12V and 24V coils and has external magnetic shield options. Ideally suited for security, telecom, instrumentation, process control, industrial and automatic test equipment (ATE) applications.

Features:

  • Miniature single-in-line (SIL) package
  • Available with standard 5V, 12V or 24V coil options
  • High-voltage switching version available
  • Normally open and change-over contact configurations available
  • External magnetic shield option available

Benefits:

  • Single-in-line configuration allows high packing densities, minimizing space and cost
  • Lower coil power consumption than electromechanical devices
  • Hermetically sealed switching contacts are immune to their environment
  • Transfer molded package gives maximum component protection

Applications:

  • Security systems
  • Telecom equipment
  • Process control systems
  • Automatic test equipment
  • Instrumentation

Access specifications, certifications, check availability and order parts below

Catalog #Coil VoltageCoil ResistanceSwitching Voltage (V DC)Switching Current (A DC)Switching Power (W)Switch TypeStockSamplesCompare
HE3321A0455002000.510A:SPST-NOCheckOrder
HE3321A12125002000.510A:SPST-NOCheckOrder
HE3321A242420002000.510A:SPST-NOCheckOrder
HE3321C0551251750.255C:SPST-COCheckOrder
HE3321C12125001750.255C:SPST-COCheckOrder
HE3321C242420001750.255C:SPST-COCheckOrder
HE3351A0551253000.510A:SPST-NOCheckOrder
HE3351A12125003000.510A:SPST-NOCheckOrder
HE3351A242420003000.510A:SPST-NOCheckOrder

pdf icon Sensors Products Catalog

This guide provides an introduction to magnetic sensing and options for value-added custom design packages.

pdf icon Handling of Reed Sensors Relays And Switches Application Note

When used within their capabilities Littelfuse reed sensors reed relays and reed switches provide many years of robust performance

pdf icon Measuring Reed Switch Sensitivity and Contact Resistance Application Note

The purpose of this application note is to document the preferred method of reading the sensitivity and contact resistance of Littelfuse reed switches.

pdf icon Capacitive Loads Application Note

When there is significant capacitance in a reed sensor reed relay or reed switch circuit the peak current and energy switched by the reed contacts should be considered.

pdf icon Inductive Load Arc Suppression Application Note

When a reed switch or reed sensor is used to control an inductive device (relay coil solenoid transformer small motor etc.)

pdf icon Reed Switch Extended Shock Capabilities Application Note

The maximum shock specifications in the Littelfuse catalog are very conservative for most switches smaller than the DRxxxx type. T

pdf icon Vibration Testing and Precautions Application Note

Littelfuse tests sinusoidal vibration according to Mil. Std. 202G Method 204D Test Condition G (10 � 2000 Hz frequency sweep at 30 G or 0.06 inch double amplitude whichever is less).

pdf icon Catalog Glossary Reed Switch Terms Application Note

Reed Switch Terms Glossary

pdf icon Littelfuse Electronics Reed Relays RoHS Compliance

RoHS: Restriction of Hazardous Substances. This European directive states that no component can contain concentrations of the following materials greater than shown