Current Monitoring Relays Transducers


  • Littelfuse Current Monitoring Relays Transducers

    520CS / 520CP

  • The 520CS and 520CP are fully-programmable, microcontroller-based, current-sensing devices designed ...More

  • Input
    Voltage (V):
     100 to 130VAC, 200 to 250VAC, 400 to 500VAC

  • Output
    Form:
     SPDT

  • Mounting Method: Four #10 or #12 screws (3/4 in - 1 in in length)

  • Littelfuse Current Monitoring Relays Transducers

    CP-5

  • The CP-5 is an undercurrent monitor designed to monitor one leg of a 3-phase system. It is commonly ...More

  • Input
    Voltage (V):
     115VAC, 480VAC

  • Output
    Form:
     SPDT

  • Termination Type: 7 in.-lbs. 12-18AWG

  • Littelfuse Current Monitoring Relays Transducers

    DCSA

  • The DCSA Series is a loop-powered, linear output current transducer that provides an output that is ...More

  • Output Voltage: 10 to 30VDC

  • Termination Type: Wire clamp for 22-14 AWG (0.336mm2-2.5mm2), , Wire clamp for 22-14 AWG (0.336mm2-2.5mm2)

  • Mounting Method: DIN 1 and DIN 3 rail mounting

  • Littelfuse Current Monitoring Relays Transducers

    ECS

  • The ECS Series of single-phase AC current sensors is a universal, overcurrent or undercurrent sensin...More

  • Input
    Voltage (V):
     24VAC, 24VDC, 120VAC, 230VAC

  • Output
    Form:
     Isolated SPDT

  • Termination Type: 0.25 in. (6.35mm) male quick connect terminals (5)

  • Littelfuse Current Monitoring Relays Transducers

    ECSW

  • The ECSW Series of single-phase, AC window, current sensors includes adjustable overcurrent and unde...More

  • Input
    Voltage (V):
     24VDC, 120VAC, 230VAC

  • Output
    Form:
     Isolated SPDT

  • Time Delay Range: 0.15 - 7s adjustable, 0.5 - 50s adjustable

  • Littelfuse Current Monitoring Relays Transducers

    LCS / LPM

  • The LCS10T12 connected to the LPM12 or LPMG12 indicator is a low cost, easy to use, go/no-go indicat...More

  • Termination Type: 12 in. (30.4cm) wire leads

  • Weight (lbs/g): ≅0.8oz (23g), ≅0.2oz (6g)

  • Information Not Available

  • Littelfuse Current Monitoring Relays Transducers

    LSR-0

  • The LSR-0 is a self-powered load sensor intended for use as a proof relay. It is used to verify that...More

  • Termination Type: Torque: 7 in.-lbs.; Wire: 12-24AWG

  • Mounting Method: Four #6 screws 3/4 in in length

  • Dimensions: 1.67" H x 2.30" W x 3.56" D (42.4 x 58.4 x 90.4 mm)

  • Littelfuse Current Monitoring Relays Transducers

    LSR-XXX

  • The LSR-XXX load sensors use current levels to determine feed rates, tool wear, loss of prime on pum...More

  • Input
    Voltage (V):
     115VAC, 230VAC, 24VAC

  • Output
    Form:
     SPDT

  • Termination Type: Torque: 7 in.-lbs.; Wire: 12-24AWG

  • Littelfuse Current Monitoring Relays Transducers

    LSRU

  • The LSRU is a microcontroller-based family of load sensors. The LSRU family of products employ three...More

  • Input
    Voltage (V):
     18 - 30VAC

  • Output
    Form:
     SPDT

  • Termination Type: Torque: 7 in.-lbs.; Wire: 12-24AWG

  • Littelfuse Current Monitoring Relays Transducers

    LSRX

  • The LSRX is an AC current sensor designed to energize the output contact whenever 4.5 Amps or greate...More

  • Output
    Form:
     SPST - Form A

  • Termination Type: Torque: 3 in.-lbs.; Wire: 12-26AWG; 0.25 in quick-connect fast-on terminals, Torque: 3 in.-lbs.; Wire: 12-26AWG; Depluggable screw terminals

  • Mounting Method: Surface mount

  • TCS

  • The TCS Series is a low cost method of go/no go current detection. It includes a solid-state output ...More

  • Output Voltage: 3 to 50VDC, 24 to 240VAC; +10 / -20%

  • Output
    Form:
     NO, NC

  • Termination Type: 0.25 in. (6.35mm) male quick connect terminals

  • Littelfuse Current Monitoring Relays Transducers

    TCSA

  • The TCSA Series is a loop-powered, linear output current transducer that provides an output that is ...More

  • Output Voltage: 10 to 30 VDC

  • Termination Type: 0.25 in. (6.35mm) male quick connect terminals

  • Mounting Method: Surface mount with one #10 (M5 x 0.8) screw