KRPS4160MM - KRPS Delay on Make Series

Littelfuse Delay on Make Relays
The KRPS Series is a factory programmed time delay relay available with 1 of 15 functions and measures only 2 inches square. The KRPS offers a wide range of fixed, onboard, or externally adjustable time delays. The output relay contacts offer a full 10A rating with complete isolation. Its microcontroller timing circuit provides excellent repeat accuracy and stability. Encapsulation protects against shock, vibration, and humidity. The KRPS Series is a cost effective approach for OEM applications that require small size, isolation, accuracy, and long life. Special time ranges and functions are available.


Operation (Delay on Make)
Upon application of the input voltage, the dime delay begins. The output relay is de-energized before and during the time delay. At the end of the time delay, the put energizes and remains energized until input voltage is removed.
Reset: Removing input voltage resets the time delay and output.

Property (Mouseover for details) Value
Input Voltage (V) 120VAC
Input Tolerance (%) -20% - 10%
Input AC Line Frequency (Hz) 50/60Hz
Output Type Isolated relay contacts
Output Form SPDT
Output Load Rating (VA) 10A resistive @ 125VAC; 5A resistive @ 230VAC and 28VDC; 1/4hp @ 125VAC
Time Delay Type Microcontroller circuitry
Time Delay Range 60m fixed
Time Delay Tolerance (%) ±2%
Reset Time (ms) ≤150ms
Initiate Time (ms) ≤40ms; 750 operations per minute
Repeat Accuracy (%) ±0.5% or 20ms whichever is greater
Setpoint vs Ambient Temperature and Operating Voltage (%) ≤ ±2%
Switching Voltage Maximum (V) 250VAC
Insulation Resistance ≥100 MΩ
Isolation Voltage (V) ≥1500V RMS input to output
Circuitry Encapsulated
Life Mechanical - 1 x 107; Electrical - 1 x 105
Power Consumption ≤2VA
Termination Type 0.25 in. (6.35mm) male quick connect terminals
Mounting Method Surface mount with one #10 (M5 x 0.8) screw
Operating Temperature -40° to 60°C (-40°F to 140°F)
Storage Temperature (F/C) -40° to 85°C (-40°F to 185°F)
Humidity 95% relative non-condensing
Dimensions 2.00 x 2.00 x 1.21 in. (50.8 x 50.8 x 30.7mm)
Weight (lbs/g) ≅2.6oz (74g)
Sample capable No