ARP23S - ARP Series

Series: ARP
Questions? Contact Littelfuse Support
Littelfuse Alternating Relays
Roll Over to Zoom
The ARP Series is used in systems where equal run time for two motors is desirable. The selector switch allows selection of alternation of either load for continuous operation. LED’s indicate the status of the output relay. This versatile series may be front panel mounted (BZ1 accessory required) or 35 mm DIN rail mounted with an accessory socket.

Operation Alternating: When the rotary switch is in the “alternate” position, alternating operation of Load A and Load B occurs upon the opening of the control switch S1. To terminate alternating operation and cause only the selected load to operate, rotate the switch to position “A” to lock Load A or position “B” to lock Load B. The LEDs indicate the status of the internal relay and which load is selected to operate.
Note: Input voltage must be applied at all times for proper alternation. The use of a solid-state control switch for S1 may not initiate alternation correctly. S1 voltage must be from the same supply as the unit’s input voltage (see connection diagrams on datasheet). Loss of input voltage resets the unit; Load A becomes the lead load for the next operation.
Duplexing (Cross Wired): Duplexing models operate the same as alternating relays and when both the Control (S1) and Lag Load (S2) Switches are closed, Load A and Load B energize simultaneously.
The DPDT 8-pin, cross-wired option, allows extra system load capacity through simultaneous operation of both motors when needed. Relay contacts are not isolated.

Property (Mouseover for details) Value
Input Voltage (V) 24VAC
Input Tolerance (%) -15% - 20%
Input AC Line Frequency (Hz) 50/60Hz
Maximum Output Voltage (V) 250VAC
Output Type Electromechanical Relay
Output Form Cross wired DPDT
Output Load Rating (VA) 10A resistive @ 120/240VAC and 28 VDC; 1/3hp @120 / 240VAC
Isolation Voltage (V) ≥1500V RMS input to output
Life Mechanical - 1 x 107; Electrical - 1 x 106
Termination Type Octal 8-pin
Mounting Method Plug-in socket
Operating Temperature -20° to 60°C (-4°F to 140°F)
Storage Temperature (F/C) -30° to 85°C (-22°F to 185°F)
Dimensions 3.20 x 2.39 x 1.78 in. (81.3 x 60.7 x 45.2mm)
Weight (lbs/g) ≅5.6oz (159g)