EL731-14-10 - EL731 Series

Series: EL731
Questions? Contact Littelfuse Support
External overview image
Roll Over to Zoom
 

Operates on AC resistance grounded systems and DC grounded systems.
The EL731 is a microprocessor-based AC/DC Sensitive Earth-Leakage Relay that offers complete coverage for all frequencies from 0-6,000 Hz. Two CT’s are required for the entire frequency range, or one CT can be used for only low-or high-frequency detection. An RTD/PTC sensor input allows over-temperature protection. The EL731 offers metering capabilities, password-protected alarm and trip settings and optional network communications. It is used to add low-level ground-fault protection to variable-speed drives, and to dc currents.

COMPUTER TO RELAY CONNECTION

Connect the EL731 to the network using a standard Ethernet patch cable. Use of a crossover cable to connect the EL731 directly to the computer running IP-Config is not recommended. A typical router will assign an IP address to all connected computers that are using DHCP. The EL731 does not support the use of DHCP. If the EL731 is being set-up for first time, it is recommended to only have one EL731 connected to the network to prevent communication errors.

Click here to download the COMPUTER TO RELAY CONNECTION Diagram.

Property (Mouseover for details) Value
Communications Modbus TCP
Relay Contacts Config 3 Form C (N.O./N.C.)
Supply Voltage ac 24
Supply Voltage dc 48
IEEE Device Numbers 38 - 49 - 50G - 50N - 51G - 51N - 79G
Relay Contacts Operation Fail-safe / Non Fail-safe
Dimensions 1.9 H x 3.8 W x 5 D in.
Weight (lbs/g) 0 Kg
Auto Manual Reset Latching trip - Non-latching alarm
Conformally coated Standard
Frequency 0 - 6000
GF Trip Level A 0.03 - 5.00
GF Trip Time s 0.05 - 2.00
Harmonic Filtering Standard
Mount Method DIN (optional) - Panel - Surface (optional)
Reset Type Front-panel switch/Remote N.O. Contact
System type Solidly Grounded AC - Solidly Grounded DC - Resistance rounded AC
Temp Sensor Config Single PTC/RTD
Check Stock Yes
To request product environmental information, please complete the Product Environmental Information Request Form.